near a strip in free space calculated by this method and the UTD. The center of the Y-oriented dipole is 2.0 above the 0 middle of a 2.0 width strip. Here, is the wavelength in 0 0 free space. A very good agreement is obvious. Figures 3 and4 show another two examples. The strip is placed on the int
Fabrication and Characterization of Side-Hole Single-Mode Optical Fibers
โ Scribed by Kazuaki Yoshida; Takayuki Morikawa
- Publisher
- Elsevier Science
- Year
- 1996
- Tongue
- English
- Weight
- 362 KB
- Volume
- 2
- Category
- Article
- ISSN
- 1068-5200
No coin nor oath required. For personal study only.
โฆ Synopsis
The fabrication and characterization of side-hole singlemode optical fibers have been studied. Controlling the internal pressure of side holes in a preform made possible the fabrication of side-hole fibers with various core ellipticities and with a circular core. The relationship between the V c and the core ellipticity for side-hole fibers showed good agreement with that calculated for elliptical core fibers without side holes. The best transmission loss of the side-hole fibers with a circular core was 0.9 dB/km. A large birefringence of 2.3 ร 10 -4 was also obtained in side-hole fibers with elliptical cores.
๐ SIMILAR VOLUMES