𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Fabrication and characterization of a pressure sensor using a pitch-based carbon fiber

✍ Scribed by C.S. Park; B.S. Kang; D.W. Lee; T.Y. Choi; Y.S. Choi

Publisher
Elsevier Science
Year
2007
Tongue
English
Weight
554 KB
Volume
84
Category
Article
ISSN
0167-9317

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

The fabrication and analysis of lateral
The fabrication and analysis of lateral pressure fiber sensor based on fiber Bragg grating
✍ Hsi-Shan Huang; Tsair-Chun Liang πŸ“‚ Article πŸ“… 2008 πŸ› John Wiley and Sons 🌐 English βš– 285 KB

## Abstract This article mainly depicts the sensitivity of the pressure sensor based on fiber Bragg grating coated with polymers of different ratio hardener and silicone sealant. The result shows that when the ratio is 1:13, the effect of the sensitivity of 1.94 Γ— 10^βˆ’2^/MPa can be obtained. Β© 2008

Design and fabrication of a single-mode
Design and fabrication of a single-mode optical fiber based refractive-index sensor
✍ Koppole Kamakshi; Vipul Rastogi; Ajeet Kumar; Jagdish Rai πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 651 KB

## Abstract We present a core diameter mismatch refractive index sensor designed in a single‐mode SM 600 optical fiber. The sensing region has been achieved by etching out the whole cladding and some portion of the core of the fiber. Effect of the etched core radius on sensitivity of the sensor has