𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Design and fabrication of a single-mode optical fiber based refractive-index sensor

✍ Scribed by Koppole Kamakshi; Vipul Rastogi; Ajeet Kumar; Jagdish Rai

Publisher
John Wiley and Sons
Year
2010
Tongue
English
Weight
651 KB
Volume
52
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

We present a core diameter mismatch refractive index sensor designed in a single‐mode SM 600 optical fiber. The sensing region has been achieved by etching out the whole cladding and some portion of the core of the fiber. Effect of the etched core radius on sensitivity of the sensor has been investigated. Sensors response has been experimentally tested for water and acetone. Β© 2010 Wiley Periodicals, Inc. Microwave Opt Technol Lett 52: 1408–1411, 2010; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.25180

πŸ“œ SIMILAR VOLUMES

Fabrication and Characterization of Side
Fabrication and Characterization of Side-Hole Single-Mode Optical Fibers
✍ Kazuaki Yoshida; Takayuki Morikawa πŸ“‚ Article πŸ“… 1996 πŸ› Elsevier Science 🌐 English βš– 362 KB

The fabrication and characterization of side-hole singlemode optical fibers have been studied. Controlling the internal pressure of side holes in a preform made possible the fabrication of side-hole fibers with various core ellipticities and with a circular core. The relationship between the V c and

A novel highly sensitive optical fiber m
A novel highly sensitive optical fiber microphone based on single mode–multimode–single mode structure
✍ An Sun; Yuliya Semenova; Gerald Farrell πŸ“‚ Article πŸ“… 2010 πŸ› John Wiley and Sons 🌐 English βš– 659 KB

## Abstract In this article, a novel multimode interference based optical fiber microphone by employing single mode‐multimode‐single mode (SMS) structure is presented. The acoustic vibration is measured by detecting the transmission loss of the SMS structure that attached to a thick aluminum membra