✦ LIBER ✦

Extension of the Performance of Aluminium-Copper Alloys by Spray Forming

✍ Scribed by K. Schimanski; A. Schulz; H. Vetter; K. Bauckhage; P. Mayr

Publisher: John Wiley and Sons
Year: 2004
Tongue: English
Weight: 451 KB
Volume: 6
Category: Article
ISSN: 1438-1656
DOI: 10.1002/adem.200300506

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Deposition of Aluminium Alloy Al12Si by

Deposition of Aluminium Alloy Al12Si by Cold Spraying

✍ L. Zhao; K. Bobzin; Dingyong He; J. Zwick; F. Ernst; E. Lugscheider 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 355 KB

Al12Si was deposited by cold spray process. The influence of spray parameters on coating build up and coating microstructure was investigated. The process gas temperature was the crucial parameter for deposition of Al12Si. Increasing process gas temperature led on the one hand to a strong increase i

Feasibility Study of Brazing Aluminium A

Feasibility Study of Brazing Aluminium Alloys Through Pre-Deposition of a Braze Alloy by Cold Spray Process

✍ L. Zhao; K. Bobzin; F. Ernst; J. Zwick; J. Roesing; E. Lugscheider 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 482 KB

Copper clustering and vacancy loss durin

Copper clustering and vacancy loss during the quenching of aluminium-copper alloys

✍ A.J Perry 📂 Article 📅 1966 🏛 Elsevier Science

The time taken to quench specimens of aluminium~opper 8110~s in wire form 8nd their subsequent ageing retes have been determined using electrical resistance measurements. It ~8s found that the quenching speed ~8s proportion81 to the square of specimen radius end that the observed quenching times wer

On the decay of vacancies in aluminium-c

On the decay of vacancies in aluminium-copper alloys measured by an internal friction method

✍ K.M. Entwistle 📂 Article 📅 1962 🏛 Elsevier Science ⚖ 687 KB

Fractional nucleation in the ageing of a

Fractional nucleation in the ageing of an aluminium—4.25 wt.% copper alloy

✍ V.B. Ghate; D.R.F. West 📂 Article 📅 1959 🏛 Elsevier Science ⚖ 547 KB

Improving the properties of aluminium al

Improving the properties of aluminium alloys by retrogression and reageing

✍ J. S. Robinson 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 461 KB

## Abstract Retrogression and reageing heat treatments offer the potential of improved tensile properties in combination with greatly increased resistance to stress corrosion cracking. The potential of this technique is reviewed with respect to the current application in the European and North Amer