๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Deposition of Aluminium Alloy Al12Si by Cold Spraying

โœ Scribed by L. Zhao; K. Bobzin; Dingyong He; J. Zwick; F. Ernst; E. Lugscheider

Publisher
John Wiley and Sons
Year
2006
Tongue
English
Weight
355 KB
Volume
8
Category
Article
ISSN
1438-1656

No coin nor oath required. For personal study only.

โœฆ Synopsis

Al12Si was deposited by cold spray process. The influence of spray parameters on coating build up and coating microstructure was investigated. The process gas temperature was the crucial parameter for deposition of Al12Si. Increasing process gas temperature led on the one hand to a strong increase in the coating thickness, on the other hand to increasing coating porosity. In addition, the spray distance and the process gas flow rate could also have a significant influence, especially when spraying with higher process gas temperatures.

๐Ÿ“œ SIMILAR VOLUMES

Thermodynamics of AlN deposition by mean
Thermodynamics of AlN deposition by means of the aluminium-trichloride-ammonia process
โœ Prof. Dr. H. Arnold; Dr. L. Biste; Dr. Th. Kaufmann ๐Ÿ“‚ Article ๐Ÿ“… 1978 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 498 KB

Equilibrium yields for CVD of AlN dependent on the input ratio AlCI,/NH, and on temperature were computed (A) for AlCl, + NH, $ AlN + 3 HCl; (B) for additional complexing AlCI, + NH, + AlCl, . NH, at substrate temperature which did not result in changes of yield above 900 "C; (C) for AlC1, . NH, +