✦ LIBER ✦

Experimental validation of a rigorous absorber model for CO2 postcombustion capture

✍ Scribed by Finn Andrew Tobiesen; Hallvard F. Svendsen; Olav Juliussen

Publisher: American Institute of Chemical Engineers
Year: 2007
Tongue: English
Weight: 606 KB
Volume: 53
Category: Article
ISSN: 0001-1541
DOI: 10.1002/aic.11133

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Multivariable control system design of C

Multivariable control system design of CO2/amine absorber/desorber units by using a rigorous steady-state model

✍ I. Alatiqi; M. Sabri; E. Alper 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 297 KB

Computer simulations with a rigorous steady-state model were used in a multivariable control system analysis of industrial CO,/MEA absorption/desorption units. Analysis predicts that the system is stable in a closed loop and that the variables should be paired such that the compositions of lean and

Rigorous experimental confirmation of a

Rigorous experimental confirmation of a theoretical model for diffusion-limited oxidation

✍ Kenneth T Gillen; Roger L Clough 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 846 KB

Mathematical Modeling, Simulation, and E

Mathematical Modeling, Simulation, and Experimental Verification of CO2 Removal in a Turbulent Contact Absorber

✍ G. Zahedi; A. Jahanmiri; A. Elkamel; A. Lohi 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 140 KB

Experimental validation of a large-signa

Experimental validation of a large-signal MESFET model for submicron-gate-length devices

✍ Stefano D'Agostino; Claudio Paoloni 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 124 KB 👁 2 views

Parameters of Gaps in the NRD Waveguide Dielectric ⑀ = 2.56, t = 2.7 mm, 2w = 2.4 mm, frequency = 50 GHz r

Experimental validation of a theoretical

Experimental validation of a theoretical model for flexural modulus of elasticity of thin cement composite

✍ M.Z. Hossain; A.S.M.A. Awal 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 958 KB

Assessment of boundary-element method fo

Assessment of boundary-element method for modelling a free-floating sloped wave energy device. Part 2: Experimental validation

✍ Grégory S. Payne; Jamie R.M. Taylor; Tom Bruce; Penny Parkin 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 1018 KB