## Abdract -Experiment investigation has been done for fatigue crack closure in 7050-T7451 aluminum alloy and 3OCrMnSiNiZA high strength steel. CT specimens with thicknesses of 2.3.4 and 8 mm are used and four techniques of closure measurement are adopted in the test, namely the COD-load complianc
Experimental simulation of fatigue crack closure
β Scribed by S. Ya. Yarema; O. D. Zinyuk
- Publisher
- Springer
- Year
- 1988
- Tongue
- English
- Weight
- 452 KB
- Volume
- 23
- Category
- Article
- ISSN
- 1573-885X
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
The shape development and crack closure behavior of a surface crack subjected to fatigue loadings are two important features studied by researchers in the fatigue community. In the current study, both features are considered in the finite element analysis, and closure behavior and shape development
A numerical analysis of plasticity-induced fatigue crack closure based upon the finite difference method is presented. This new method permits modelling easily fatigue crack growth as well as contacts between fracture faces, without requiring sophisticated algorithms. The model is applied to a wide
The phenomenon of fatigue crack closure has attracted continued interest over recent years. This paper concerns itself with one aspect of the phenomenon namely the effects of a single asperity on the crack face close to the crack tip and under dominantly plane strain Mode 1 loading conditions. The m
Recently Elber proposed that fatigue cracks close at positive stress levels during constant amplitude stress cycling. To investigate this behaviour, centrally cracked 2024-T3 A~umiRium ahoy sheets were tested. Crack opening displacements and strains near the fracture surface were measured for a prop