𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Experimental Investigation on Hydromechanical Deep Drawing of Aluminum Alloy with Heated Media

✍ Scribed by Lihui Lang; Baosheng Liu; Tao Li; Xiangni Zhao; Yuansong Zeng

Book ID
112210810
Publisher
John Wiley and Sons
Year
2012
Tongue
English
Weight
934 KB
Volume
83
Category
Article
ISSN
1611-3683

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Influence of temperature on the initiati
Influence of temperature on the initiation of adhesive wear with respect to deep drawing of aluminum-alloys
✍ P. Groche; G. Nitzsche πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 227 KB

In the past, different models were established to explain the causes of adhesive metal transfer. The initiation of adhesive wear is normally described as a function of mechanical loads acting on local asperities. A possible direct influence of local temperatures on the initiation of adhesive wear is

Numerical and experimental investigation
Numerical and experimental investigations on the effect of the heating strategy and the punch speed on the warm deep drawing of magnesium alloy AZ31
✍ G. Palumbo; D. Sorgente; L. Tricarico; S.H. Zhang; W.T. Zheng πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 827 KB

The present work has been focused on the warm deep drawing process by superimposing a thermal gradient between the blank centre in contact with the punch and the blank flange (which is going to be drawn). Using such a technique the limit drawing ratio of Mg alloys can be dramatically improved. As a