Experimental and Numerical Simulation Study of Heat Transfer Due to Confined Impinging Circular Jet

✍ Scribed by L. Chang-geng; Z. Jie-min

• Publisher: John Wiley and Sons
• Year: 2007
• Tongue: English
• Weight: 160 KB
• Volume: 30
• Category: Article
• ISSN: 0930-7516
• DOI: 10.1002/ceat.200700129

✦ Synopsis

Abstract

An experimental and numerical simulation study of heat transfer due to a confined impinging circular jet is presented. In this research, a stainless steel foil heated disk was used as the heat transfer surface of a simulated chip, and the thermocouples were mounted symmetrically along the diameter of the foil to measure the temperature distribution on the surface. Driven by a small pump, a circular air jet (1.5 mm and 1 mm in diameter) impinged on the heat‐transfer surface with middle and low Reynolds numbers. The parameters, such as Reynolds number and ratio of height‐to‐diameter, were changed to investigate the radial distribution of the Nusselt number and the characteristics of heat transfer in the stagnation region. Numerical computations were performed by using several different turbulence models. In wall bounded turbulent flows, near‐wall modeling is crucial. Therefore, the turbulence models enhanced wall treatment, such as the RNG κ‐ϵ model, may be superior for modeling impingement flows. The numerical results showed reasonable agreement with the experimental data for local heat transfer coefficient distributions. The impinging jet may be an effective method to solve the cooling problem of high power density electronic packaging.