𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Experimental and finite-element analysis of an electronic pole-change drive

✍ Scribed by Osama, M.; Lipo, T.A.

Book ID
117864919
Publisher
IEEE
Year
2000
Tongue
English
Weight
180 KB
Volume
36
Category
Article
ISSN
0093-9994

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Experimental characterization and finite
Experimental characterization and finite element analysis of inflated fabric beams
✍ Christopher G. Malm; William G. Davids; Michael L. Peterson; Adam W. Turner πŸ“‚ Article πŸ“… 2009 πŸ› Elsevier Science 🌐 English βš– 599 KB

An airbeam is a high-strength fabric sleeve with a highly flexible internal bladder that can be used as a load-bearing beam or arch when inflated. Due to their fabric construction, airbeams are inherently thinwalled structures that are prone to local buckling. In this study, airbeams were tested in

Finite element model and experimental an
Finite element model and experimental analysis of crack–inclusion interaction
✍ R. Li; S. Wu; E. Ivanova; A. Chudnovsky; K. Sehanobish; C. P. Bosnyak πŸ“‚ Article πŸ“… 1993 πŸ› John Wiley and Sons 🌐 English βš– 995 KB

One of the key requirements for developing tough multiphase blend systems, for example, selecting the type of discrete phases (hard or soft) in a polymer matrix, is the ability to predict the fracture path. Most of these selections rely heavily on prior experience or on intuitive rationale. There ar

Finite element/experimental analysis of
Finite element/experimental analysis of cavity nucleation in an Alξ—ΈSiξ—ΈGe alloy
✍ H.J. Koenigsmann; E.A. Starke Jr; P.E. Allaire πŸ“‚ Article πŸ“… 1996 πŸ› Elsevier Science 🌐 English βš– 791 KB

## Cavity nucleation in a recently developed AlL0.55SiL2.02 Ge (wt%) alloy was studied by measuring the volume fraction of voids as a function of strain and precipitate diameter using a pycnometer. The finite element method was employed in order to calculate stress distributions around the SiGe p