✦ LIBER ✦

Experimental analysis of properties of materials for rapid prototyping

✍ Scribed by Ana Pilipović; Pero Raos; Mladen Šercer

Publisher: Springer
Year: 2007
Tongue: English
Weight: 439 KB
Volume: 40
Category: Article
ISSN: 0268-3768
DOI: 10.1007/s00170-007-1310-7

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Water-soluble photopolymers for rapid pr

Water-soluble photopolymers for rapid prototyping of cellular materials

✍ R. Liska; F. Schwager; C. Maier; R. Cano-Vives; J. Stampfl 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 666 KB

## Abstract Commercial light‐sensitive resins for Rapid Prototyping of cellular materials are often unsuitable for different molding techniques because removal of the mold uses thermal decomposition at temperatures of up to 600°C. In this study, a resin formulation based on water‐soluble polymers w

Photopolymers for Rapid Prototyping of S

Photopolymers for Rapid Prototyping of Soluble Mold Materials and Molding of Cellular Biomaterials

✍ Monika Schuster; Robert Inführ; Claudia Turecek; Jürgen Stampfl; Franz Varga; Ro 📂 Article 📅 2006 🏛 Springer Vienna 🌐 English ⚖ 216 KB

Study of Trapped Material in Rapid Proto

Study of Trapped Material in Rapid Prototyping Parts

✍ B. Y. Ang; C. K. Chua; Z. H. Du 📂 Article 📅 2000 🏛 Springer 🌐 English ⚖ 438 KB

Preparation and physical properties of p

Preparation and physical properties of photopolymer/SiO2 nanocomposite for rapid prototyping system

✍ Shih-Hsuan Chiu; Dien-Chi Wu 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 161 KB

Development of an Advisory System for Tr

Development of an Advisory System for Trapped Material in Rapid Prototyping Parts

✍ Ang Beng Yew; Chua Chee Kai; Du Zhaohui 📂 Article 📅 2000 🏛 Springer 🌐 English ⚖ 133 KB

Optimization of FIB milling for rapid NE

Optimization of FIB milling for rapid NEMS prototyping

✍ Bjarke Malm; Dirch H. Petersen; Anders Lei; Timothy J. Booth; Lasse V. Homann; P 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 593 KB