✦ LIBER ✦

Evolution of microvoids in PAN-based carbon fibers

✍ Scribed by Deng-hua Li; Gang-ping Wu; Chun-xiang Lu; Yong-hong Li; Fu He; Zhi-hai Feng; Xiu-tao Li; Yu-ming Guo

Publisher: Elsevier Science
Year: 2010
Tongue: English
Weight: 38 KB
Volume: 48
Category: Article
ISSN: 0008-6223
DOI: 10.1016/j.carbon.2010.01.042

No coin nor oath required. For personal study only.

✦ Synopsis

instead of the commonly-used alkaline-acid method. The process parameters were optimized. Results showed that the fixed carbon mass fraction achieved by this method could be as high as 99.9% under the optimal conditions while that by the alkaline-acid method was only 85.8%, indicating that the alkaline roastingleaching method was very effective to improve the fixed carbon content of the graphite.

📜 SIMILAR VOLUMES

Porous structure of pan-based activated

Porous structure of pan-based activated carbon fibers

✍ Zhenyu Ryu; Jingtang Zheng; Maozhang Wang 📂 Article 📅 1998 🏛 Elsevier Science 🌐 English ⚖ 591 KB

The porous structure of polyacrylonitrile (PAN)-based activated carbon fibers (ACFs) was studied by means of nitrogen adsorption over a wide range of relative pressure and scanning electron microscopy (SEM). The specific surface area of samples was evaluated using the standard BET method. The microp

Characterization of microvoids in polyac

Characterization of microvoids in polyacrylonitrile-based carbon fibres

✍ A. Takaku; M. Shioya 📂 Article 📅 1986 🏛 Springer 🌐 English ⚖ 643 KB

Raman spectrum of modified PAN-based car

Raman spectrum of modified PAN-based carbon fibers during graphitization

✍ Tse-Hao Ko 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 317 KB

Graphite fibers were developed from polyacrylonitrile (PAN) fibers which were modified with potassium permanganate. After the transitional temperature, the formation of graphite structures commenced, the crystals increased in thickness, and the preferred orientation of the fiber crystals increased.

Analysis of failure in ‘Recoil from tens

Analysis of failure in ‘Recoil from tension’ of pan-based carbon fibers

✍ Jiang Hao; A.S. Abhiraman; K. Tsui 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 898 KB

Results from a study of the "recoil from tension" method for estimating the compressive strength of the poiyacrylonitrile (PAN)-based carbon fibers are reported here. Analysis of the effect of different gauge lengths on the recoil strength distribution and the fracture morphological features of cros

The enhancement of microvoids in acrylic

The enhancement of microvoids in acrylic fibers

✍ Jian Qin 📂 Article 📅 1992 🏛 John Wiley and Sons 🌐 English ⚖ 946 KB

The present work is concerned with the spinning of two series of blend fibers containing acrylic copolymer (PAC) and small amount of secondary polymer, such as polyvinyl acetate ( PVAc) , polystyrene ( PS ) , acrylonitrile-styrene (AS) and acrylonitrile-vinyl acetate ( AVAc) copolymers. The blend ac

Evolution of structure and properties of

Evolution of structure and properties of PAN precursors during their conversion to carbon fibers

✍ Zhang Wangxi; Liu Jie; Wu Gang 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 303 KB

The formation and evolution of structure, and the changes of properties during the preoxidation, precarbonization, and carbonization of different PAN precursors were studied by the combination of DSC, FT-IR, SEM and some traditional measurements, such as density and mechanical properties of various