𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Etching of GaP surfaces in Aqua regia and in the Bromine-methanol-water system

✍ Scribed by Dr. M. Somogyi; V. Schiller

Publisher
John Wiley and Sons
Year
1978
Tongue
English
Weight
640 KB
Volume
13
Category
Article
ISSN
0232-1300

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Surface conditions of Nitinol wires, tub
Surface conditions of Nitinol wires, tubing, and as-cast alloys. The effect of chemical etching, aging in boiling water, and heat treatment
✍ Shabalovskaya, S. A. ;Anderegg, J. ;Laab, F. ;Thiel, P. A. ;Rondelli, G. 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 728 KB

## Abstract The surface conditions of Nitinol wires and tubing were evaluated with the use of X‐ray photoelectron spectroscopy, high‐resolution Auger spectroscopy, electron backscattering, and scanning‐electron microscopy. Samples were studied in the as‐received state as well as after chemical etch

Liquid–liquid miscibility gaps and hydra
Liquid–liquid miscibility gaps and hydrate formation in drug–water binary systems: Pressure–temperature phase diagram of lidocaine and pressure–temperature–composition phase diagram of the lidocaine–water system
✍ René Ceolin; Maria Barrio; Josep-Lluis Tamarit; Nestor Veglio; Marc-Antoine Perr 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 388 KB 👁 1 views

The pressure-temperature (P-T) melting curve of lidocaine was determined (dP/dT = 3.56 MPa K(-1)), and the lidocaine-water system was investigated as a function of temperature and pressure. The lidocaine-water system exhibits a monotectic equilibrium at 321 K (ordinary pressure) whose temperature in

Comparison of log k′ — solvent compositi
Comparison of log k′ — solvent composition relationships in thinlayer and column chromatography for systems of the type: Silanized silica — water + methanol
✍ Dzido, T. ;Soczewiński, E. 📂 Article 📅 1979 🏛 John Wiley and Sons 🌐 English ⚖ 190 KB

## Abstract Relationships between log k' values of polynuclear hydrocarbons and composition of water/methanol mixtures were determined for HPTLC on RP‐18 silica and for HPLC using RP‐2 silica. In spite of differences in the adsorbents used, a good correlation between HPLC and TLC parameters was fou