✦ LIBER ✦

Estimation of high temperatures in works operations

✍ Scribed by Skirrow, F. W.

Publisher: Wiley (John Wiley & Sons)
Year: 1908
Weight: 162 KB
Volume: 27
Category: Article
ISSN: 0368-4075
DOI: 10.1002/jctb.5000270905

No coin nor oath required. For personal study only.

✦ Synopsis

The glnss tube, A. of nbont If inch diameter, waB fitted with n wire gnuze disc, B, and siipplicd with con1 gns through the smnll jet, C. If the gns siipply wns sofficiently reduced. n flnmc could be produced nbove

📜 SIMILAR VOLUMES

Estimation of flows and temperatures in

Estimation of flows and temperatures in process networks

✍ G. M. Stanley; R. S. H. Mah 📂 Article 📅 1977 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 935 KB

High temperature copolymerization of sty

High temperature copolymerization of styrene/ethyl acrylate: Reactivity ratio estimation in bulk and solution

✍ Nahla Sahloul; Alexander Penlidis 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 114 KB 👁 2 views

High-temperature solution polymerization

High-temperature solution polymerization of butyl acrylate/methyl methacrylate: Reactivity ratio estimation

✍ M. Hakim; V. Verhoeven; N. T. McManus; M. A. Dubé; A. Penlidis 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 121 KB 👁 1 views

Solution copolymerizations of butyl acrylate/methyl methacrylate in toluene were performed over an expanded temperature range (60 -140°C) compared to more typical ranges that do not exceed 80°C. From a large amount of data collected independently at two laboratories, reactivity ratios were estimated

Ergonomics evaluation of the work of VDT

Ergonomics evaluation of the work of VDT operators in Poland

✍ M. Kamieńska-Zyła 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 164 KB

## Results of ergonomics investigations into the discomforts experienced by VDT operators in Poland are discussed. The highest percentage of complaints from persons working with computers concern discomfort associated with eyesight, a smaller percentage complain of mental load, and next complain o

Measurement of Plasma Parameters in Low

Measurement of Plasma Parameters in Low Temperature High Density Hollow Cathode Plasma Jet Working in Magnetic Field

✍ P. Virostko; Z. Hubička; P. Adámek; M. Čada; J. Olejníček; M. Tichý; M. Šícha 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 344 KB 👁 1 views

## Abstract Low temperature low pressure hollow cathode plasma jet system working in static magnetic field was investigated by means of time resolved Langmuir probe technique. The hollow cathode discharge was excited in a cylindrical nozzle fabricated from Ti by continuous DC, pulsed DC, continuous

Accountability of work activity in high-

Accountability of work activity in high-consequence work systems: human error in context

✍ JOHN C. McCARTHY; PATRICK G.T. HEALEY; PETER C. WRIGHT; MICHAEL D. HARRISON 📂 Article 📅 1997 🏛 Elsevier Science 🌐 English ⚖ 371 KB

Organizational context is now accepted as a central concept in attempts to understand error in human-machine systems. However, accounts which emphasize the processes of everyday organizing, such as accountability and work activity, are needed in order to establish organizational requirements for des