𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Epoxidation process using titanium-rich silicalite catalysts

✍ Scribed by G.L. Crocco; J.G. Zajacek

Book ID
103551967
Publisher
Elsevier Science
Year
1995
Tongue
English
Weight
106 KB
Volume
15
Category
Article
ISSN
0144-2449

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Deactivation and regeneration of titaniu
Deactivation and regeneration of titanium silicalite catalyst for epoxidation of propylene
✍ Qingfa Wang; Li Wang; Junxia Chen; Yulong Wu; Zhentao Mi πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 845 KB

Continuous epoxidation of propylene with 30-wt% hydrogen peroxide in isopropyl alcohol solvent over titanium silicalite (TS-1) zeolite was carried out and the good selectivity to propylene oxide and stability of TS-1 were obtained. After the reaction of 263 h, the deactivation of the TS-1 catalyst o

Epoxidation of allyl alcohol with hydrog
Epoxidation of allyl alcohol with hydrogen peroxide over titanium silicalite TS-2 catalyst
✍ Agnieszka WrΓ³blewska; Eugeniusz Milchert πŸ“‚ Article πŸ“… 2007 πŸ› Wiley (John Wiley & Sons) 🌐 English βš– 261 KB

## Abstract The influence of the technological parameters on the course of the epoxidation of allyl alcohol with 30% H~2~O~2~ in the presence of titanium silicalite TS‐2 catalyst and methanol as a solvent was studied. The process was performed in an autoclave at the autogenic pressure. The influenc

Influence of process parameters on the e
Influence of process parameters on the epoxidation of 2-buten-1-ol over titanium silicalite TS-1 catalyst
✍ Agnieszka WrΓ³blewska; Ewelina Ławro; Eugeniusz Milchert πŸ“‚ Article πŸ“… 2008 πŸ› Versita 🌐 English βš– 299 KB

## Abstract The influence of process parameters on the epoxidation of 2-buten-1-ol with 30 % hydrogen peroxide using the titanium silicalite TS-1 is presented. The studies were carried out under autogenic pressure (in autoclave). Methanol was used as a solvent in this process. The influence of temp