Engineering Design Applications II: Structures, Materials and Processes

✍ Scribed by Andreas Öchsner, Holm Altenbach

• Publisher: Springer International Publishing
• Year: 2020
• Tongue: English
• Leaves: 430
• Series: Advanced Structured Materials 113
• Edition: 1st ed.
• Category: Library

✦ Synopsis

This book offers an update on recent developments in modern engineering design. Different engineering disciplines, such as mechanical, materials, computer and process engineering, provide the foundation for the design and development of improved structures, materials and processes. The modern design cycle is characterized by the interaction between various disciplines and a strong shift to computer-based approaches where only a few experiments are conducted for verification purposes. A major driver for this development is the increased demand for cost reduction, which is also linked to environmental demands. In the transportation industry (e.g. automotive or aerospace), the demand for higher fuel efficiency is related to reduced operational costs and less environmental damage. One way to fulfil such requirements is lighter structures and/or improved processes for energy conversion. Another emerging area is the interaction of classical engineering with the health and medical sector.

✦ Table of Contents

Front Matter ....Pages i-x
Investigation of the Damage Behavior of Polyurethane in Stress Relaxation Experiments and Estimation of the Stress-at-Break σb with a Failure Envelope (Selina Neuhaus, Henning Seibert, Stefan Diebels)....Pages 1-15
Identification of Inelastic Parameters of the AISI 304 Stainless Steel (Miguel Vaz Jr., E. R. Hulse, M. Tomiyama)....Pages 17-35
Effect of Fiber Volume Fraction on Mechanical Properties of Type E-Glass in Composite Materials (Zamzam A. Elsharif, Bashir M. Gallus)....Pages 37-46
Experimental Study of Temperature Effect on the Mechanical Properties of GFRP and FML Interface (Z. P. Chow, Z. Ahmad, K. J. Wong)....Pages 47-58
An Alternative Method for Modelling the Degradation of Hyperelastic Materials Within the Framework of Finite-Strain Elastoplasticity (L. Écsi, P. Élesztős)....Pages 59-82
Geometric Nonlinear Numerical Analysis of Shells in the Form of a Hyperboloid of Revolution (Ismael Taha Farhan Farhan, Gil-oulbé Mathieu, Timur Soibnazarovich Imomnazarov)....Pages 83-94
Numerical Experiments on Helicoids Stress-Strain State (Marina Rynkovskaya, A. S. Markovich, M. Gil-Oulbe, S. V. Strashnov)....Pages 95-104
Transversely Cracked Beams with Quadratic Function’s Variation of Height (Matjaž Skrinar)....Pages 105-116
Effect of Vapour-Grown Carbon Nanofibres on Thermo-Mechanical Properties of High-Functionality Based Resin Used in CFRP Strengthening System Subjected Severe Service Conditions (R. Al-Safy, R. Al-Mahaidi, G. P. Simon, J. Habsuda)....Pages 117-131
Study on Closed-Die Forging in Stainless Steel as Standard ASTM F138 in Grain Size Function (Givanildo Alves dos Santos, Wagner Figueiredo, Ylich Peter Schmitt, Maurício Silva Nascimento, Fabio Miranda, Gilmar Ferreira Batalha et al.)....Pages 133-153
Contribution to an Electrical Transport in Montmorillonite/Polyaniline Composite (S. Rusnáková, K. Karvanis, P. Koštial, Z. Koštialová-Jančíková, A. Zimula)....Pages 155-165
Chosen Physical Properties of Menzolit BMC 3100 (S. Rusnáková, K. Karvanis, P. Koštial, Z. Koštialová Jančíková, A. Zimula)....Pages 167-173
Structural Analysis by Finite Element Method in Ball Valves to Improve Their Mechanical Properties (M. Egure-Hidalgo, J. M. Aburto-Barrera, C. R. Torres-San Miguel, J. Martinez-Reyes, B. Romero-Ángeles)....Pages 175-185
Modelling of Cavitation Around Hydrofoils with Included Bubble Dynamics and Phase Changes (Galina Ilieva, Christo Pirovsky)....Pages 187-200
Implementation of Beamforming Codes in 3D CFD Simulations for the Localization and Visualization of Rotating Sound Sources (Christian Maier, Wolfram Pannert)....Pages 201-214
Signal Analysis and Numerical Method Roles in Neural Interfaces Development (I. Kuzmanić, I. Vujović, J. Šoda, M. Rogić Vidaković)....Pages 215-229
Optimization of the Head Geometry for a Cable Car Passing over a Support (M. Wenin, A. Windisch, S. Ladurner, M. L. Bertotti, G. Modanese)....Pages 231-241
Comparison in Performance of Hybrid and Marvel NoKH Okra/Abelmoschus esculentus Fibre Reinforced Polymer Composites Under Tensile Load (Nadendla Srinivasababu)....Pages 243-255
Analysis of Stress-Strain State of Multi-wave Shell on Parabolic Trapezoidal Plan (V. N. Ivanov, Timur Soibnazarovich Imomnazarov, Ismael Taha Farhan Farhan, Daou Tiekolo)....Pages 257-262
General Boundary Element Method for the Dual-Phase Lag Equations Describing the Heating of Two-Layered Thin Metal Films (Ewa Majchrzak)....Pages 263-278
Numerical and Experimental Analysis of a Personalized Prosthesis for a Patient with Unilateral Hip Osteoarthritis (Juan Alfonso Beltrán-Fernández, Omar Rolando Ruiz-Muñoz, Luis Héctor Hernández-Gómez, Alejandro González-Rebattú y González, Itzel Bantle-Chávez, Carolina Alvarado-Moreno et al.)....Pages 279-316
Biomechanical Fundamentals for Designing Machines that Allows Wear Testing (Iván González-Uribe, Liliana Gutiérrez-Lonche, Diego Ivan Islas-Jiménez, Guillermo Manuel Urriolagoitia-Calderón, Guillermo Urriolagoitia-Sosa)....Pages 317-322
Mechanical Design and Numerical Analysis of a Femorotibial Implant in Patients with Medial Knee Osteoarthritis (José María Aburto-Barrera, Mildred Egure-Hidalgo, Christian Díaz-León, Juan Alejandro Vázquez-Feijoo, Guillermo Urriolagoitia-Sosa)....Pages 323-331
Design and Comparative Numerical Analysis of Designs of Intramedular Telescopic Systems for the Rehabilitation of Patients with Osteogenesis Imperfecta (OI) Type III (J. L. Rueda, C. R. Torres, V. Ramírez, L. Martínez, G. Urriolagoitia)....Pages 333-341
Finite Element Analysis of 3D Models of Upper and Lower Limbs of Mexican Patients with Osteogenesis Imperfecta (OI) Type III (V. Ramírez, C. R. Torres, J. L. Rueda, L. Martínez, B. Romero, G. M. Urriolagoitia)....Pages 343-353
Manufacturing of a Human’s Hand Prosthesis with Electronic Movable Phalanges Based on a CT Image: An Amputation Case (Juan Alfonso Beltrán-Fernández, Itzel Alejandrina Aguirre Hernández, Itzel Bantle-Chávez, Carolina Alvarado-Moreno, Luis Héctor Hernández-Gómez, Pablo Moreno-Garibaldi et al.)....Pages 355-396
Reconstruction and Finite Element Evaluation of a Calcaneous Implant by Stereolithographic 3D Printing Technique (Juan Alfonso Beltrán-Fernández, Juan Carlos Hermida-Ochoa, Adolfo López-Lievano, Luis Héctor Hernández-Gómez, Berenice Uribe-Cortes, Pablo Moreno-Garibaldi et al.)....Pages 397-405
Development of an Auxiliary Biomechanical Assistance System for Blindness or Partial Vision (L. H. Hernández-Gómez, J. A. Beltrán-Fernández, J. Martínez-Paredes, J. Medel-Ortiz, Itzel Bantle-Chávez, Carolina Alvarado-Moreno et al.)....Pages 407-434

✦ Subjects

Engineering; Engineering Design; Transportation Technology and Traffic Engineering; Materials Engineering