This paper addresses the controllability aspect in vibration control of beam structures with piezoelectric actuators. First, we model the beam structure with piezoelectric actuators and establish the corresponding state-coupled equation. Based on the state equation, we propose a controllability inde
ENERGY EFFICIENT ACTUATORS IN VIBRATION CONTROL OF PLATED STRUCTURES
โ Scribed by A. MUKHERJEE; S. JOSHI
- Publisher
- Elsevier Science
- Year
- 2002
- Tongue
- English
- Weight
- 267 KB
- Volume
- 258
- Category
- Article
- ISSN
- 0022-460X
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
Vibration of a laminated composite plate is controlled by passive and active control methods. Stiffness change in composite structures by changes in laminate orientation is used as an example of a passive control method, negative velocity feedback control with the piezoelectric sensor/actuator is us
An approach of dynamic control for suppressing external disturbance to variable thickness beam plates with sensors and actuators of piezoelectric layers on/in the structures is proposed in this paper using the scaling function transform of the Daubechies wavelet theory for approximation of functions
The problem of feedback control of vibrations in a micromachined cantilever beam with nonlinear electrostatic actuators is considered. Various forms of nonlinear feedback controls depending on localized spatial averages of the beam velocity and displacement near the beam tip are derived by consideri
A dual approach based on both structural tailoring and piezoelectric strain actuation, aimed at controlling the free vibration and stability of a spinning circular shaft subjected to axial forces is presented. Due to the involvement in these structural systems of gyroscopic forces and, consequently,
This paper presents an actuator with a sensor for controlling vibrations of machines. It consists of a voice coil-type electromagnetic actuator connected to a piezoelectric sensor and a coil spring. The actuator is used for controlling a motor laid on the beam. The sensor detects the disturbance for