𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Emulsion stability and demulsification during the direct extraction of penicillin broth

✍ Scribed by Csaba Szabó


Book ID
101725738
Publisher
John Wiley and Sons
Year
1992
Tongue
English
Weight
429 KB
Volume
40
Category
Article
ISSN
0006-3592

No coin nor oath required. For personal study only.

✦ Synopsis


In this article, we present the factors which influence the stability of the emulsion forming under the circumstances of the direct extraction of penicillin fermentation broth and the conditions of demulsification. A laboratory method has been developed for testing demulsifiers and a quantitative evaluation of their properties determining the separation of phases has been worked out as well. It has been found that an emulsion of oil in water (o/w) forms and that this is very stable; it can be broken only by the presence of demulsifier and by using a field of centrifugal force. We have discovered that the most effective demulsifiers are cation-active surfactants for 1-4 g/L broth concentration. Furthermore, it is advantageous if the demulsifier contains a nonionic surfactant and wetting agent as well. From the 19 surface-active compounds studied in the laboratory, we found that the NADAR 107 A and ARMOGARD D-5306 demulsifiers contained the best properties for the extraction of the penicillin broth.


📜 SIMILAR VOLUMES


Causes of emulsion formation during solv
✍ Sandra Lennie; Peter J. Hailing; George Bell 📂 Article 📅 1990 🏛 John Wiley and Sons 🌐 English ⚖ 208 KB 👁 1 views

Extraction with water-immiscible solvents is widely used to recover products from fermentation broths, including penicillin and many other antibiotics, though there is little published work on this operation. Formation of rather stable emulsions is often a problem during the process, leading to sign

Stability of nanoparticles during semiba
✍ Nader Naderi; Naser Sharifi-Sanjani; Baharak Khayyat-Naderi; Farima Agend 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 354 KB 👁 3 views

## Abstract The size and stability of latex particles in the semibatch emulsion polymerization of butyl methacrylate (BMA), in the presence of 0–10% methacrylic acid (MAA), were investigated. Response surface methodology (RSM), as a design of experiment, was used to obtain a more systematic underst