✦ LIBER ✦

Electrolytic Deposition of Hydroxyapatite Coating on CoNiCrMo Substrates

✍ Scribed by Dong-Yang Lin; Yong Jiang; Xiao-Xiang Wang

Publisher: John Wiley and Sons
Year: 2010
Tongue: English
Weight: 506 KB
Volume: 12
Category: Article
ISSN: 1438-1656
DOI: 10.1002/adem.200980013

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Electrolytic deposition of calcium etidr

Electrolytic deposition of calcium etidronate drug coating on titanium substrate

✍ Duan, Ke ;Fan, Yuwei ;Wang, Rizhi 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 390 KB

## Abstract Wear debris‐induced osteolysis is the major cause of aseptic loosening and failure of hip implants. One of the promising therapeutic interventions to improve the longevity of hip implants is to administrate bisphosphonate drug to inhibit osteoclastic bone resorption. This study aimed at

Effects of applied voltages on hydroxyap

Effects of applied voltages on hydroxyapatite coating of titanium by electrophoretic deposition

✍ Xianwei Meng; Tae-Yub Kwon; Yunzhi Yang; Joo L. Ong; Kyo-Han Kim 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 236 KB

## Abstract Hydroxyapatite (HA) coatings were deposited on titanium substrates by electrophoretic deposition (EPD) at constant voltage and dynamic voltage, respectively. Various surface morphologies were observed under different type of voltages. Under a constant voltage of 20 V, a dense HA coating

Electrochemical preparation of chitosan/

Electrochemical preparation of chitosan/hydroxyapatite composite coatings on titanium substrates

✍ Redepenning, Jody ;Venkataraman, Guhanand ;Chen, Jun ;Stafford, Nathan 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 246 KB

## Abstract Composite coatings containing brushite (CaHPO~4~ · 2H~2~O) and chitosan were prepared by electrochemical deposition. The brushite/chitosan composites were converted to hydroxyapatite/chitosan composites in aqueous solutions of sodium hydroxide. The coatings ranged from ≈1 to 15% chitosa

Characterization of electrolytically pre

Characterization of electrolytically prepared brushite and hydroxyapatite coatings on orthopedic alloys

✍ Redepenning, Jody ;Schlessinger, Tom ;Burnham, Sandra ;Lippiello, Louis ;Miyano, 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 780 KB

Details of a procedure for electrolytically preparing highly pure brushite (CaHPO, . 2H,O) coatings on high surface area metal substrates are provided. The influence of current density and deposition time on coating morphology is described. After a discussion of procedures used to convert the brushi

Determination of coating weights on elec

Determination of coating weights on electrolytic tinplate

✍ Liebmann, H. ;Price, J. W. ;Thompson, S. H. 📂 Article 📅 1949 🏛 Wiley (John Wiley & Sons) ⚖ 389 KB

The following results were obtnincd with a solution of primary calcium phosphate of known concentration, prepared by adding 433.6 ml. of 0.04712-N. &(OH), to 200 ml. of o.1022-N. H,PO,. 50 ml. of thc mixture, containing 0 . 1 8 8 7 ~. of Ca(H,PO,), was used for each titration Weight of Ca(H,PO,), Na

Adherent apatite coating on titanium sub

Adherent apatite coating on titanium substrate using chemical deposition

✍ R. Rohanizadeh; R.Z. LeGeros; M. Harsono; A. Bendavid 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 397 KB

## Abstract Plasma‐sprayed “HA” coatings on commercial orthopedic and dental implants consist of mixtures of calcium phosphate phases, predominantly a crystalline calcium phosphate phase, hydroxyapatite (HA) and an amorphous calcium phosphate (ACP) with varying HA/ACP ratios. Alternatives to the pl