๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Electrochemistry of zinc corrosion in dental amalgams

โœ Scribed by N. K. Sarkar

Publisher
Springer
Year
1988
Tongue
English
Weight
262 KB
Volume
7
Category
Article
ISSN
0261-8028

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Corrosion currents of dental amalgams
Corrosion currents of dental amalgams
โœ Grajower, Rafael ;Greener, Evan H. ๐Ÿ“‚ Article ๐Ÿ“… 1980 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 562 KB

## Abstract The polarization resistance and anodic polarization curves of three amalgam types were determined in saline solution. Corrosion currents were determined by extrapolation of anodic Tafel slopes. A good correlation was found between corrosion currents and reciprocal polarization resistanc

In vitro corrosion of dental amalgam pha
In vitro corrosion of dental amalgam phases
โœ Marek, M. ;Hochman, R. F. ;Okabe, T. ๐Ÿ“‚ Article ๐Ÿ“… 1976 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 761 KB

The effects of corrosion on the major phases of dental amalgam microstructure have been studied in vitro on samples prepared by electroplating mercury on AgaSn. Tests were made in synthetic saliva, and samples were examined in a scanning electron microscope before and after the exposure. Contact of

A model for the corrosion behavior of de
A model for the corrosion behavior of dental amalgams
โœ Lemaitre, L. ;Moors, M. ;Van Peteghem, A. P. ๐Ÿ“‚ Article ๐Ÿ“… 1989 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 521 KB

At high frequencies, electrochemical impedance behavior for corroding dental amalgams cannot be interpreted in terms of a simple Randles equivalent circuit. This may often be ascribed to the imperfect cell geometry resulting in a nonuniform current distribution. However, the insertion of a constant

Corrosion under stress of materials comp
Corrosion under stress of materials composing dental amalgam
โœ Johnson, L. B. ;Lawless, K. R. ๐Ÿ“‚ Article ๐Ÿ“… 1969 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 329 KB

Corrosion potentials of materials composing dental amalgam have been measured in artificial saliva as the specimens were subjected to an increasing tensile load. Further, tensile tests have been carried out on specimens which had been previously subjected to controlled corrosion. The corrosion pote

Corrosion of the ฮทโ€ฒ(Cu-Sn) phase in dent
Corrosion of the ฮทโ€ฒ(Cu-Sn) phase in dental amalgam
โœ Marek, M. ;Okabe, T. ;Butts, M. B. ;Fairhurst, C. W. ๐Ÿ“‚ Article ๐Ÿ“… 1983 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 492 KB

Previous studies have shown preferential corrosion of the q'(Cu-Sn) phase in highcopper dental amalgam both in vifro and in vivo, while samples of pure 7' have shown high corrosion resistance. To clarify this contradiction, samples of pure q' crystals mixed with other phases were prepared and tested