𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Electrochemical studies on the influence of proteins on the corrosion of implant alloys

✍ Scribed by Rachel L. Williams; Stanley A. Brown; Katharine Merritt


Publisher
Elsevier Science
Year
1988
Tongue
English
Weight
759 KB
Volume
9
Category
Article
ISSN
0142-9612

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Influence of testing parameters on the c
✍ M. KΓΌhlein; U. Galovsky πŸ“‚ Article πŸ“… 2004 πŸ› John Wiley and Sons 🌐 German βš– 346 KB πŸ‘ 1 views

## Abstract In sodium chloride solutions alloy composition, phases, microstructure and grain size influence the corrosion behaviour of magnesium alloys. Concentration and distribution of the critical impurities iron, nickel and copper affect the corrosion performance strongly. Salt spray tests acc

Influence of grain size on mechanical an
✍ K.V. Kutniy; I.I. Papirov; M.A. Tikhonovsky; A.I. Pikalov; S.V. Sivtzov; L.A. Pi πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 176 KB

## Abstract The microstructure, mechanical property and corrosion behavior of magnesium alloy WE43 (MgYNdZr alloy) in the environment simulating biological fluid were investigated. Samples of ultra‐fine‐grained magnesium alloy with high mechanical properties were obtained by methods of severe plast

The effect of recrystallization on corro
✍ G. S. Peng; K. H. Chen; H. C. Fang; S. Y. Chen; H. Chao πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 German βš– 848 KB

## Abstract By weight loss, potentiodynamic polarization, cyclic voltammetry, and electrochemical impedance spectroscopy (EIS) techniques complemented by optical and scanning electron microscopy observations, the effect of recrystallization on the corrosion, and electrochemical behavior of 7150 Al

The influence of copper content on inter
✍ H. Zhan; J. M. C. Mol; F. Hannour; L. Zhuang; H. Terryn; J. H. W. de Wit πŸ“‚ Article πŸ“… 2008 πŸ› John Wiley and Sons 🌐 German βš– 697 KB

## Abstract Application prospects in automotive and aerospace industry have led to extensive studies on AA6xxx alloys in recent years. Varying amounts of Mg, Si and Cu and heat treatments are used to achieve the desired mechanical properties in these alloys. In this investigation, a series of tests