𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Electrochemical impedance spectroscopic studies of titanium and its alloys in saline medium

✍ Scribed by S. Tamilselvi; R. Murugaraj; N. Rajendran

Publisher
John Wiley and Sons
Year
2007
Tongue
German
Weight
355 KB
Volume
58
Category
Article
ISSN
0947-5117

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

The influence of potential on electrochemical behaviour of pure Ti, Ti‐6Al‐7Nb, and Ti‐6Al‐4V ELI alloy under saline conditions were investigated by electrochemical impedance spectroscopy (EIS). All measurements were carried out in saline solution (0.9% NaCl) at different impressed potentials (corrosion potential (E~corr~), 0 mV (SCE) and + 500 mV (SCE)) for 1 h. The experimental results were compared with those obtained by potentiodynamic polarization curves. The corrosion current densities obtained for the titanium alloys showed lower values than for pure Ti, indicating the formation of a stable passive film with time. Electrochemical impedance spectroscopic studies indicated that the resistance of the passive film increased with the impressed potential. The impedance spectra were fitted using a non‐linear least square (NLLS) fitting procedure. The magnitude of the corrosion resistance of titanium alloys under saline solution was compared and results are presented.

πŸ“œ SIMILAR VOLUMES

Electrochemical corrosion behavior of bi
Electrochemical corrosion behavior of biomedical Ti–22Nb and Ti–22Nb–6Zr alloys in saline medium
✍ B. L. Wang; Y. F. Zheng; L. C. Zhao πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 German βš– 527 KB

## Abstract The aims of this study were to investigate the effects of Zr addition and potentiodynamic polarization on the microstructure and corrosion resistance of Ti–22Nb and Ti–22Nb–6Zr alloy samples. The corrosion tests were carried out in 0.9% NaCl at 37 °C and neutral pH value, utilizing the

A time-based potential step analysis of
A time-based potential step analysis of electrochemical impedance incorporating a constant phase element: A study of commercially pure titanium in phosphate buffered saline
✍ Mark T. Ehrensberger; Jeremy L. Gilbert πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 English βš– 446 KB πŸ‘ 1 views

## Abstract The measurement of electrochemical impedance is a valuable tool to assess the electrochemical environment that exists at the surface of metallic biomaterials. This article describes the development and validation of a new technique, potential step impedance analysis (PSIA), to assess th

Exfoliation corrosion of 7150 Al alloy w
Exfoliation corrosion of 7150 Al alloy with various tempers and its electrochemical impedance spectroscopy in EXCO solution
✍ J. F. Li; Z. Q. Jia; C. X. Li; N. Birbilis; C. Cai πŸ“‚ Article πŸ“… 2009 πŸ› John Wiley and Sons 🌐 German βš– 858 KB

## Abstract The exfoliation corrosion susceptibility and electrochemical impedance spectroscopy (EIS) of 7150 Al alloys with T6, T73, and RRA (retrogression at 175 °C for 3 h) tempers in EXCO solution were investigated. The anodic equilibrium precipitate __Ξ·__(MgZn~2~) is continuous or closely spac

Exfoliation corrosion of Al-Li alloy 209
Exfoliation corrosion of Al-Li alloy 2090-T6 in EXCO solution: A study of electrochemical noise and electrochemical impedance spectroscopy
✍ J.X. Su; Z. Zhang; Y.Y. Shi; F.H. Cao; J.Q. Zhang πŸ“‚ Article πŸ“… 2006 πŸ› John Wiley and Sons 🌐 German βš– 281 KB

The initiation and propagation characteristics of the exfoliation corrosion (EC) of 2090-T6 Al-Li alloy in EXCO solution has been studied using electrochemistry impedance spectroscopy (EIS), electrochemical noise (EN), and optical microscope techniques. A four-stage evolution of localized corrosion