Of the various lead oxides tested, red lead (Pb304) proved to be the most suitable for use as cathode material in lithium cells having a voltage of 1.5 V. Based on electrochemical, chemical, and physical measurements, the reaction mechanisms of red lead cathodes are discussed. The reduction of red l
Electrochemical behaviour of tungsten oxides in lithium-organic electrolyte cells
β Scribed by M. Boccoli; F. Bonino; M. Lazzari; B. Rivolta
- Publisher
- Elsevier Science
- Year
- 1982
- Tongue
- English
- Weight
- 708 KB
- Volume
- 7
- Category
- Article
- ISSN
- 0167-2738
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
Effects of organic additives on the (IC impedance behaviour of rechargeable lithium electrode in propylene carbonate dissolving LiClO, (PC/LiClO,) have been studied. Addition of 2-methylfuran, Zmethylthiophene or benzene to the electrolyte solution improved the coulombic efficiencies of lithium duri
Requirements for the degree of exclusion of water of the so-called non-aqueous electrolytes depend largely on the electrochemical systems under consideration and there is therefore no unique definition with regard to limits. The electrochemistry of alkali metals is understandably extremely sensitive
The cycling performance of a lithium-manganese oxide spinet (prepared from Mn0 2 and Li2CO 3) has been investigated as a function of preparation temperature m a lithium polymer electrolyte cell Excellent reversibility and high rate performance have been observed from a spmel phase prepared at 450 Β°C