Compressive andflexural strengths, dimensional changes, and freezethaw resistance of concretes made with low water to cement ratios were evaluated. In addition, exploratory studies of the rheological properties of low water content cement-aggregate-admixture systems were performed. The results indic
Effects of the very low water/cement ratio
✍ Scribed by Vladimír Živica
- Publisher
- Elsevier Science
- Year
- 2009
- Tongue
- English
- Weight
- 591 KB
- Volume
- 23
- Category
- Article
- ISSN
- 0950-0618
No coin nor oath required. For personal study only.
✦ Synopsis
The subject of paper are the results of the study on the hardened cement paste prepared with very low w/c ratios from 0.115 till 0.075 and pressure compaction till 300 MPa. Well known and often reported the significant compressive strength increase and the total porosity and pore median decrease was found. But other significant effects have been found: an increase of the CaO:SiO 2 and the decrease of H 2 O:SiO 2 ratios, their consequence were the particles morphology changes shown as a gradual loose of the crystal character under the formation of the finer spherical and cylindrical particles of the hydration products showing the increase in the biding capacity and the increase of the homogeneity of the pore structure. These factors seem to be the principle of the extreme effects of the very low w/c ratio and pressure compaction used. In the final consequence the fine-grain character and form and dimension increased homogeneity enabling the formation of the amount of the strength connection among the individual particles into and extraordinary dense structure seem to be the principle effect of the very low w/c ratio and pressure compaction of the cement mixtures.
📜 SIMILAR VOLUMES
Clinkers of nominal Czechoslovak production were ground in presence of grinding aid (d~rivative of lignin) to specific surfaces 400 -2700 m-/kg and were processed in presence of sodium Zignosulfonate and alkali carbonate (resp. bicarbonate) into pastes and mortars with low water-to-cement ratio. The
Mercury intrusion porosimetry (MIP) test is one of the techniques that have been widely used for analyzing the pore size distribution of hardened cement paste (hcp) and also for the determination of the critical pore width. This study presents the test results of the MIP experiments obtained for thr