𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effects of annealing on the mechanical properties of Zr-based bulk metallic glass for use in die applications

✍ Scribed by J.J. Chang; K.M. Cho; W.S. Chung; K.H. Kim; U.C. Chung; J.H. Park; Y.R. Cho


Publisher
Elsevier Science
Year
2005
Tongue
English
Weight
283 KB
Volume
396
Category
Article
ISSN
0921-5093

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Effects of casting temperature on mechan
✍ J. Mao; H.F. Zhang; H.M. Fu; A.M. Wang; H. Li; Z.Q. Hu πŸ“‚ Article πŸ“… 2010 πŸ› Elsevier Science 🌐 English βš– 848 KB

The effects of casting temperature on microstructure and mechanical properties of as-cast 3 mm-diameter Zr 64.9 Al 7.9 Ni 10.7 Cu 16.5 and Zr 47 Cu 37.5 Ag 7.5 Al 8 alloys were investigated. It was found that crystalline phases were precipitated in amorphous matrix as casting temperature increased.

Effects of a minor addition of Si and/or
✍ T. Zhang; H. Men; S.J. Pang; J.Y. Fu; C.L. Ma; A. Inoue πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 980 KB

Effects of the addition of a small amount of Sn and/or Si on glass-forming ability and mechanical properties of Cu 50 Zr 42.5 Ti 7.5 (at.%) bulk metallic glass were studied. The critical diameter for glass formation is 5 mm for Cu 50 Zr 42.5 Ti 7.5 alloy, and increases to 6 mm for (Cu 0.5 Zr 0.425 T

The effect of Nb addition on mechanical
✍ C. L. Qiu; L. Liu; M. Sun; S. M. Zhang πŸ“‚ Article πŸ“… 2005 πŸ› John Wiley and Sons 🌐 English βš– 415 KB πŸ‘ 1 views

## Abstract Bulk metallic glasses (BMGs) of Zr~65 βˆ’ __x__~Nb~__x__~‐ Cu~17.5~Ni~10~Al~7.5~ with Nb = 0, 2, and 5 at % were prepared by copper mold casting. Compression tests reveal that the two BMGs containing Nb exhibited superior strength and plasticity to the base alloy. The corrosion behavior o