𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effect of TiC addition on the microstructure and properties of Ti(C,N)-WC-Co-Ni cermet

✍ Scribed by T. Laoui; O. Biest

Publisher
Springer
Year
1994
Tongue
English
Weight
850 KB
Volume
13
Category
Article
ISSN
0261-8028

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Effect of VC and nano-TiC addition on th
Effect of VC and nano-TiC addition on the microstructure and properties of micrometer grade Ti(CN)-based cermets
✍ Jun Wang; Ying Liu; Ping Zhang; Jinwen Ye; Mingjing Tu πŸ“‚ Article πŸ“… 2009 πŸ› Elsevier Science βš– 591 KB

The effect of VC and nano-TiC addition on the microstructure of micrometer grade Ti(CN)-based cermets sintered by low pressure sintering was investigated. Low pressure sintering can effectively improve the density of cermets. Compared with HIP, low pressure sintering has low cost and saves one worki

Effect of TaC addition on the microstruc
Effect of TaC addition on the microstructures and mechanical properties of Ti(C, N)-based cermets
✍ Peng Wu; Yong Zheng; Yongle Zhao; Haizhou Yu πŸ“‚ Article πŸ“… 2010 πŸ› Elsevier Science βš– 486 KB

The microstructures of the prepared Ti(C, N)-based cermets with various TaC additions were studied using X-ray diffractometry (XRD) and scanning electron microscopy (SEM). Mechanical properties such as transverse rupture strength (TRS), fracture toughness (K 1C ) and hardness (HRA) were also measure

The effect of forging temperature on mic
The effect of forging temperature on microstructure and mechanical properties of in situ TiC/Ti composites
✍ Feng-cang Ma; Wei-jie Lu; Ji-ning Qin; Di Zhang; Bo Ji πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science βš– 825 KB

In this paper, 2 vol% TiC/Ti-1100 composites were fabricated using in situ technologies, and the b transus temperature of the composite was measured by metallographic techniques. The ingots after breakdown were forged in various temperature ranges, i.e. in the b phase field, in the (a + b) phase fie