✦ LIBER ✦

Microstructure and mechanical properties of TiC–WC–(Ti,W)C–Ni cermets

✍ Scribed by H. Kwon; S. Kang

Publisher: Elsevier Science
Year: 2009
Tongue: English
Weight: 799 KB
Volume: 520
Category: Article
ISSN: 0921-5093
DOI: 10.1016/j.msea.2009.05.017

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Microstructure evolution and mechanical

Microstructure evolution and mechanical properties of (Ti0.93W0.07)C–xWC–20Ni cermets

✍ Jiwoong Kim; Shinhoo Kang 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 967 KB

Microstructure and mechanical properties

Microstructure and mechanical properties of Ti-based solid-solution cermets

✍ Jiwoong Kim; Moonsu Seo; Shinhoo Kang 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 613 KB

ChemInform Abstract: Preparation, Micros

ChemInform Abstract: Preparation, Microstructure, and Mechanical Properties of TiC0.35N0.35—TiNi Cermets.

✍ L. Kh. Askarova; E. V. Shchipachev; I. G. Grigorov; Yu. G. Zainulin 📂 Article 📅 2001 🏛 John Wiley and Sons ⚖ 30 KB

Microstructures and mechanical propertie

Microstructures and mechanical properties of nanoTiN modified TiC-based cermets for the milling tools

✍ Ning Liu; Chengliang Han; Yudong Xu; Sheng Chao; Min Shi; Jianping Feng 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 934 KB

Effect of VC and nano-TiC addition on th

Effect of VC and nano-TiC addition on the microstructure and properties of micrometer grade Ti(CN)-based cermets

✍ Jun Wang; Ying Liu; Ping Zhang; Jinwen Ye; Mingjing Tu 📂 Article 📅 2009 🏛 Elsevier Science ⚖ 591 KB

The effect of VC and nano-TiC addition on the microstructure of micrometer grade Ti(CN)-based cermets sintered by low pressure sintering was investigated. Low pressure sintering can effectively improve the density of cermets. Compared with HIP, low pressure sintering has low cost and saves one worki

Effect of TaC addition on the microstruc

Effect of TaC addition on the microstructures and mechanical properties of Ti(C, N)-based cermets

✍ Peng Wu; Yong Zheng; Yongle Zhao; Haizhou Yu 📂 Article 📅 2010 🏛 Elsevier Science ⚖ 486 KB

The microstructures of the prepared Ti(C, N)-based cermets with various TaC additions were studied using X-ray diffractometry (XRD) and scanning electron microscopy (SEM). Mechanical properties such as transverse rupture strength (TRS), fracture toughness (K 1C ) and hardness (HRA) were also measure