✦ LIBER ✦

Effect of thermal exposure on the properties of phenolic composites: Dynamic mechanical analysis

✍ Scribed by John A. Hiltz; Stephen G. Kuzak; Phillip A. Waitkus

Publisher: John Wiley and Sons
Year: 2000
Tongue: English
Weight: 274 KB
Volume: 79
Category: Article
ISSN: 0021-8995
DOI: 10.1002/1097-4628(20010118)79:3<385::aid-app10>3.0.co;2-j

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of organic acids on the mechanica

Effect of organic acids on the mechanical properties of phenolic resin composites

✍ Keith C. Hong; Marco Ravasi; Nora Keil; Bruce Vigeant; Yunshang Ma 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 139 KB 👁 2 views

The effect of salicylic acid and its derivatives on the properties of phenolic resin composites was evaluated. The composites were reinforced with aluminum oxide particles in both solid and hollow forms. Differential scanning calorimetry studies have shown that the reaction rate of phenolic resin wa

Jute sliver–LDPE composites: Effect of a

Jute sliver–LDPE composites: Effect of aqueous consolidation on mechanical and dynamic properties

✍ A. K. Rana; A. Mandal; A. N. Banerjee 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 200 KB 👁 1 views

The aqueous consolidation of jute slivers and its comparison with the control in the LDPE matrix were studied in this article. The increase in strength of the consolidated jute sliver-LDPE composite was noticed. Jute slivers were immersed in water, squeezed, air dried, and finally consolidated at 16

Effect of fillers on thermal and mechani

Effect of fillers on thermal and mechanical properties of polyurethane elastomer

✍ Salih Benli; Ülkü Yilmazer; Fikret Pekel; Saim Özkar 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 312 KB 👁 1 views

The effects of five different types of fillers on the thermal and mechanical properties of hydroxyl-terminated polybutadiene-based polyurethane elastomers were explored to develop a filled polyurethane elastomeric liner for rocket motors with hydroxyl-terminated polybutadiene-based composite propell

Effect of needle density on the mechanic

Effect of needle density on the mechanical properties of fiber-reinforced polypropylene composites

✍ T.-M. Wu; C.-B. Lee 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 267 KB 👁 2 views

The partial impregnation textile preform consisting of chopped-strand, long glass fiber and nonwoven polypropylene (PP) has been prepared by needle-punching to improve fiber-matrix distribution before processing. These unconsolidated textile preforms were then preheated and hot-pressed for consolida

Blends of nylon with polyethylene: Effec

Blends of nylon with polyethylene: Effect of compatibilization on mechanical and dynamic mechanical properties

✍ Rupali Gadekar; Asmita Kulkarni; J. P. Jog 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 306 KB 👁 1 views

Blends of Nylon 6 with very low density polyethylene (VLDPE) have been studied. The blends exhibit two phase morphology wherein VLDPE is dispersed in the form of spherical domains in Nylon 6 matrix. The water absorption of the blends decreased with increasing VLDPE content. The mechanical properties

Effect of different treatments on the th

Effect of different treatments on the thermal behavior of reinforced phenol–formaldehyde polymer composites

✍ Rajni Agarwal; N. S. Saxena; Kanan Bala Sharma; S. Thomas; M. S. Sreekala 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 158 KB 👁 1 views

Thermal behavior of oil palm fiber-reinforced phenol-formaldehyde (PF) resins with different chemical treatments were analyzed using Differential Scanning Calorimeter (DSC). A well-defined peak of crystallization was observed in all the samples. However, in one of them a second exothermic peak also