✦ LIBER ✦

Effect of organic acids on the mechanical properties of phenolic resin composites

✍ Scribed by Keith C. Hong; Marco Ravasi; Nora Keil; Bruce Vigeant; Yunshang Ma

Publisher: John Wiley and Sons
Year: 2000
Tongue: English
Weight: 139 KB
Volume: 76
Category: Article
ISSN: 0021-8995
DOI: 10.1002/(sici)1097-4628(20000502)76:5<642::aid-app5>3.0.co;2-u

No coin nor oath required. For personal study only.

✦ Synopsis

The effect of salicylic acid and its derivatives on the properties of phenolic resin composites was evaluated. The composites were reinforced with aluminum oxide particles in both solid and hollow forms. Differential scanning calorimetry studies have shown that the reaction rate of phenolic resin was accelerated by salicylic acid, but was not affected by the other compounds. Salicylic acid also reduced the flexural strengths of the phenolic resin composites. The strength was decreased by more than 30% in comparison to that with no acid added. In contrast, two derivatives of this acid-sodium salicylate and 4-hydroxybenzoic acid-have minimal impact on the flexural strengths of the composites.

📜 SIMILAR VOLUMES

Effect of thermal exposure on the proper

Effect of thermal exposure on the properties of phenolic composites: Dynamic mechanical analysis

✍ John A. Hiltz; Stephen G. Kuzak; Phillip A. Waitkus 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 274 KB 👁 1 views

The effect of moisture absorption on mec

The effect of moisture absorption on mechanical and dielectric properties of epoxy resins and composites

✍ E. M. Nechvolodnova; E. V. Prut; I. M. Belgovskiy; A. T. Ponomarenko; V. G. Shev 📂 Article 📅 1992 🏛 John Wiley and Sons 🌐 English ⚖ 193 KB

Effect of cashew nut shell liquid (CNSL)

Effect of cashew nut shell liquid (CNSL) on properties of phenolic resins

✍ P. A. Mahanwar; D. D. Kale 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 330 KB 👁 1 views

## SYNOPSIS Cashew nut shell liquid (CNSL) is a natural product, and because of its phenolic nature it undergoes reactions similar to those of phenol. The cost of CNSL is much less than phenol. The effect of replacement of phenol by CNSL on the properties of novolak and resole resins was experimen

Reactive compatibilization of a nitrile

Reactive compatibilization of a nitrile rubber/phenolic resin blend: Effect on adhesive and composite properties

✍ P. Sasidharan Achary; R. Ramaswamy 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 472 KB 👁 2 views

Resole phenolic resins containing various p-cresol (PC) to phenol (P) mol ratios were prepared and characterized. These phenolic resins were blended with nitrile rubber (NBR) and the measurements of adhesive joint strength, stress-strain properties, DSC, TGA, DMA, TEM, and SEM were performed using a

Effect of needle density on the mechanic

Effect of needle density on the mechanical properties of fiber-reinforced polypropylene composites

✍ T.-M. Wu; C.-B. Lee 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 267 KB 👁 1 views

The partial impregnation textile preform consisting of chopped-strand, long glass fiber and nonwoven polypropylene (PP) has been prepared by needle-punching to improve fiber-matrix distribution before processing. These unconsolidated textile preforms were then preheated and hot-pressed for consolida

Interdependence between the curing, stru

Interdependence between the curing, structure, and the mechanical properties of phenolic resins

✍ J. Wolfrum; G. W. Ehrenstein 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 410 KB 👁 1 views

The interdependence between the curing conditions, structure, and the mechanical properties of tow neat phenolic resin systems was investigated. Changes of the distribution of the void diameters were characterized by light-an scanning electron microscope analyses. Tensile tests and dynamic mechanica