๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Effect of the strain rate of metals under isothermal conditions on the dynamic recrystallization

โœ Scribed by D. I. Braslavskii; I. A. Izakov

Publisher
Springer US
Year
1987
Tongue
English
Weight
292 KB
Volume
29
Category
Article
ISSN
0026-0673

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

The problem of the negative strain-rate
The problem of the negative strain-rate sensitivity of metals under the portevin-lechatelier deformation conditions
โœ A. Korbel; H. Dybiec ๐Ÿ“‚ Article ๐Ÿ“… 1981 ๐Ÿ› Elsevier Science โš– 307 KB

Experimental data are used to show that the 'negative' strain rate sensitivity of metals, under conditions producing 'jerky flow', is only an apparent value. Taking into account the mode of propagation of slip-bands, a simple model of the phenomenon is postulated. Also discussed are the most importa

Influence of Purity on the Dynamic Recry
Influence of Purity on the Dynamic Recrystallization of Metals and Alloys
โœ Montheillet, F. ;Le Coze, J. ๐Ÿ“‚ Article ๐Ÿ“… 2002 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 144 KB ๐Ÿ‘ 2 views

The availability of high-purity metals and high-purity based alloys has recently allowed us to better understand the various processes of dynamic recrystallization (DRX) that take place during hot working. According to the mobility of dislocations and the subsequent efficiency of dynamic recovery (w

The effect of strain rate on mechanical
The effect of strain rate on mechanical properties of cold forming sheet metals
โœ A. DurmuลŸ ๐Ÿ“‚ Article ๐Ÿ“… 2009 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 291 KB ๐Ÿ‘ 1 views

## Abstract Tensile mechanical properties of DIN EN 10268โ€“1999 cold forming sheet metals were investigated within a strain rate range from 1.10^โ€4^ to 1.10^โ€1^ s^โ€1^ using conventional tensile testing machine. This investigation also examined the influence of heat treatment on the mechanical proper

Effect of heating rate on the recrystall
Effect of heating rate on the recrystallization temperature of tantalum
โœ D. Beckenhauer; P. Niessen; R. Pick ๐Ÿ“‚ Article ๐Ÿ“… 1993 ๐Ÿ› Springer ๐ŸŒ English โš– 169 KB

During work on the high-strain rate behaviour of tantalum, it became necessary to estimate at what temperature recrystallization would occur. Although this information would ideally be obtained under the dynamic conditions of impact loading, it was thought