𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effect of the operational conditions on the process of cure of thermoset resins

✍ Scribed by V. Plesu; K. Azaar; J.M. Vergnaud


Publisher
Elsevier Science
Year
1993
Tongue
English
Weight
440 KB
Volume
29
Category
Article
ISSN
0014-3057

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


The effect of bismaleimide resin on curi
✍ R. Chandra; L. Rajabi; R. K. Soni πŸ“‚ Article πŸ“… 1996 πŸ› John Wiley and Sons 🌐 English βš– 621 KB

An analysis of the cure kinetics of several formulations composed of diglycidyl ether of bisphenol-A (DGEBPA) and aromatic diamines, methylenedianiline (MDA) and diaminodiphenyl sulfone (DDS), in the absence and presence of 4,4'-bismaleimidodiphenylmethane (BM) was performed. The dynamic differentia

Chemorheology of thermosetting resins. I
✍ Kwok-Wai Lem; Chang Dae Han πŸ“‚ Article πŸ“… 1983 πŸ› John Wiley and Sons 🌐 English βš– 855 KB

## Abstract The effect of particulates on both the rheological properties during cure and the curing kinetics of unsaturated resin has been investigated. For the investigation, a general‐purpose unsaturated polyester resin was used, with calcium carbonate and clay as inorganic particulates and high

Chemorheology of thermosetting resins. I
✍ Kwok-Wai Lem; Chang Dae Han πŸ“‚ Article πŸ“… 1983 πŸ› John Wiley and Sons 🌐 English βš– 849 KB

## Abstract An experimental study was conducted to investigate the effect of low‐profile thermoplastic additives on the rheological behavior during cure and the curing kinetics of unsaturated polyester resin. For the study, a general‐purpose polyester resin was used and two different types of therm

Chemorheology of thermosetting resins. I
✍ Chang Dae Han; Kwok-Wai Lem πŸ“‚ Article πŸ“… 1984 πŸ› John Wiley and Sons 🌐 English βš– 939 KB

The rheological properties and curing kinetics of a vinyl ester resin have been determined during isothermal cure. Both steady and oscillatory shearing flow properties were determined using a cone-and-plate rheometer, and the curing kinetics were determined using a differential scanning calorimeter