Potato tubers (cv Maris Piper) were grown at 10, 16, 20 and 25 °C in constant-environment chambers until maturity, whereupon the starches were extracted and subjected to rigorous chemical and physical analysis. The structure of the amylopectin molecules from the different starches postdebranching wi
Effect of temperature on the saccharide composition obtained after α-amylolysis of starch
✍ Scribed by L. M. Marchal; A. M. J. van de Laar; E. Goetheer; E. B. Schimmelpennink; J. Bergsma; H. H. Beeftink; J. Tramper
- Publisher
- John Wiley and Sons
- Year
- 1999
- Tongue
- English
- Weight
- 274 KB
- Volume
- 63
- Category
- Article
- ISSN
- 0006-3592
No coin nor oath required. For personal study only.
✦ Synopsis
The hydrolysis of starch to low-molecularweight products (normally characterised by their dextrose equivalent (DE), which is directly related to the number-average molecular mass) was studied at different temperatures. Amylopectin potato starch, lacking amylose, was selected because of its low tendency towards retrogradation at lower temperatures. Bacillus licheniformis ␣-amylase was added to 10% [w/w] gela- tinised starch solutions. The hydrolysis experiments were done at 50, 70, and 90°C. Samples were taken at defined DE values and these were analysed with respect to their saccharide composition. At the same DE the oligosaccharide composition depended on the hydrolysis temperature. This implies that at the same net number of bonds hydrolysed by the enzyme, the saccharide composition was different. The hydrolysis temperature also influenced the initial overall molecular-weight distribution. Higher temperatures led to a more homogenous molecular weight distribution. Similar effects were observed for ␣-amylases from other microbial sources such as Bacillus amyloliquefaciens and Bacillus stearothermophilus. Varying the pH (5.1, 6.2, and 7.6) at 70°C did not significantly influence the saccharide composition obtained during B. licheniformis ␣-amylase hydrolysis. The underlying mechanisms for B. licheniformis ␣-amylase were studied using pure linear oligosaccharides, ranging from maltotriose to maltoheptaose as substrates. Activation energies for the hydrolysis of individual oligosaccharides were calculated from Arrhenius plots at 60, 70, 80, and 90°C. Oligosaccharides with a degree of polymerisation exceeding that of the substrate could be detected. The contribution of these oligosaccharides increased as the degree of polymerisation of the substrate decreased and the temperature of hydrolysis increased. The product specificity decreased with increasing temperature of hydrolysis, which led to a more equal distribution between the possible products formed. Calculations with the subsite map as determined for the closely related ␣-amylase from B. amyloliquefaciens reconfirmed this finding of a decreased substrate specificity with increased temperature of hydroly-sis.
📜 SIMILAR VOLUMES
Potato microtubers (cv Maris Piper) were grown at 10, 16 and 24¡C in total darkness for 28 days. Soluble and insoluble starch synthase, ADPglucose pyrophosphorylase, sucrose synthase and fructokinase were assayed in extracts of the microtubers and, in the case of soluble and insoluble starch synthas
## Abstract This study describes the effect of predrying sago starch, a tropical starch, on the resultant mechanical properties of starch/poly(ε‐caprolactone) composite materials. Sago starch was dried to less than a 1% moisture level in a vacuum oven and dispersed into a polycaprolactone matrix wi
## Abstract The steady‐state fluorescence (SSF) technique was used for studying swelling of disc‐shaped polyacrylamide (PAAm)‐κ‐carrageenan (κC) composites which were prepared by free‐radical crosslinking copolymerization at 80°C. Pyranine was introduced as a fluorescence probe during polymerizatio
The hydroxy-terminated polybutadiene (HTPB) based composite propellants without any metal additive and with varying concentration of metal additives such as iron oxide, copperchromite, strontium carbonate and lithium fluoride have been cast and cured. These propellants have been characterized for de