𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effect of support conditions on the fire behaviour of steel and composite beams

✍ Scribed by Peter J. Moss; Andrew H. Buchanan; Jenny Seputro; Clayton Wastney; Richard Welsh

Publisher
John Wiley and Sons
Year
2004
Tongue
English
Weight
297 KB
Volume
28
Category
Article
ISSN
0308-0501

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Effect of glass fibres and fire retardan
Effect of glass fibres and fire retardant on the combustion behaviour of composites, glass fibres–poly(butylene terephthalate)
✍ A. Casu; G. Camino; M. De Giorgi; D. Flath; A. Laudi; V. Morone πŸ“‚ Article πŸ“… 1998 πŸ› John Wiley and Sons 🌐 English βš– 127 KB πŸ‘ 2 views

The oxygen index (OI) of poly(butylene terephthalate) (PBT) tends to decrease when it is combined with milled-glass fibres either with or without the sizing treatment. This shows that the previously found apparent increase of flammability of PBT glass fibre composites (GFPBT) as compared to PBT is n

Effect of Microstructure on the Wear Beh
Effect of Microstructure on the Wear Behaviour of a Dual Phase Steel
✍ A. Bayram; A. Uğuz πŸ“‚ Article πŸ“… 2001 πŸ› John Wiley and Sons 🌐 English βš– 176 KB πŸ‘ 2 views

In this study wear behaviour of 0.1% C containing dual phase steels with three different microstructures have been examined. Intercritical annealing, step quenching and intermediate quenching heat treatments have been applied to the alloy in order to obtain different morphologies of ferrite and mart

Conditioning studies on Australian wheat
Conditioning studies on Australian wheat. I. The effect of conditioning on milling behaviour
✍ J. Butcher; N. L. Stenvert πŸ“‚ Article πŸ“… 1973 πŸ› John Wiley and Sons 🌐 English βš– 495 KB πŸ‘ 1 views

## Abstract The effect of moisture level and lying time on the milling behaviour of a number of Australian wheat varieties was investigated. Significant differences were noted in the time required to reach optimum milling performance and this was also dependent on the level of water addition. Possi

Effects of residual stresses on the fati
Effects of residual stresses on the fatigue behaviour of welded steel structures
✍ W. Fricke πŸ“‚ Article πŸ“… 2005 πŸ› John Wiley and Sons 🌐 English βš– 474 KB

## Abstract Residual stresses due to the welding process in steel structures can significantly affect the fatigue behaviour. Usually, high tensile residual stresses up to the yield strength are conservatively assumed at the weld toes. This conservative assumption can result in misleading fatigue as