✦ LIBER ✦

Effect of physical properties on the suspension of solid particles in three-phase sparged reactors

✍ Scribed by A.B. Pandit; J.B. Joshi

Publisher: Elsevier Science
Year: 1987
Tongue: English
Weight: 678 KB
Volume: 13
Category: Article
ISSN: 0301-9322
DOI: 10.1016/0301-9322(87)90059-0

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Suspension of solid particles in multi-i

Suspension of solid particles in multi-impeller three-phase stirred tank reactors

✍ Naoki Dohi; Yukimasa Matsuda; Norihiro Itano; Kimio Minekawa; Takanori Takahashi 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 488 KB

Effect of the phase ratio on the particl

Effect of the phase ratio on the particle properties of poly(vinyl chloride) resins produced by suspension polymerization

✍ N. Etesami; M. Nasr Esfahany; R. Bagheri 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 349 KB 👁 2 views

A correlation based on the physical prop

A correlation based on the physical properties of the solid particles for the evaluation of pressure drop in a two-impinging streams gas-solid reactor

✍ Abraham Tamir; Kfir Luzzatto; Doron Sartana; Salomon Surin 📂 Article 📅 1985 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 238 KB 👁 2 views

Effect of particle tethering and Scale-U

Effect of particle tethering and Scale-Up on solid–liquid mass transfer in Three-Phase fluidized beds of light particles

✍ Jiasen Song; Caroline L. Hyndman; Apostolos Kantzas 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 597 KB

The effects of capillary forces on the f

The effects of capillary forces on the flow properties of glass particle suspensions in mineral oil

✍ Jonathan McCulfor; Paul Himes; Mark R. Anklam 📂 Article 📅 2010 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 448 KB 👁 2 views

Influence of the solids R.T.D.F. on the

Influence of the solids R.T.D.F. on the conversion in three phase fluidized bed reactors

✍ S. Sicardi; G. Rovero; A. Gianetto; R. Conti 📂 Article 📅 1986 🏛 Elsevier Science 🌐 English ⚖ 378 KB

intersections when the values of \(B\) and \(\alpha^{\prime}\) are higher than 1 , i.e. when the deactivation is so high that the functional availability of the reactor volume is not completely achieved. The maximum values of \(z_{A P} / z_{A M}\) for \(B\) and \(\alpha^{\prime}\) less than 1 are a