Effect of gain medium on the performance of Brillouin fiber laser
✍ Scribed by H. Ahmad; R. Parvizi; N.S. Shahabuddin; Z. Yusoff; S.W. Harun
- Publisher
- John Wiley and Sons
- Year
- 2010
- Tongue
- English
- Weight
- 410 KB
- Volume
- 52
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
The performance of single‐wavelength Brillouin fiber lasers (BFLs) is investigated for different gain medium.An efficient BFL is demonstrated using a piece of 100‐m‐long PCF as the gain medium. The BFL provides a peak power of 0 dBm and a side mode suppression ratio of more than 30 dB with the threshold power of 8.5 dBm for the BFL generation. However, the threshold is much lower for the BFL configured with 20 km long non‐zero dispersion shifted fiber, which has a smaller core size. With this fiber, the threshold power of the BFL is obtained at 5 dBm, and this power increases with the shorter length of the gain medium. © 2010 Wiley Periodicals, Inc. Microwave Opt Technol Lett 52: 2158–2160, 2010; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.25386
📜 SIMILAR VOLUMES
## Abstract A novel system configuration for optical generation of microwave/millimeter‐wave (mm‐wave), which is realized through Brillouin‐Erbium fiber laser (BEFL), is investigated.The microwave/mm‐wave is generated by the mixing of the __n__th‐order Stokes wave and the pump wave on the high‐spee
## Abstract Linewidth measurements of a tuneable, high power, narrow linewidth semiconductor fiber ring laser are presented. The laser had a typical output power of 9.72 dBm with a corresponding 170 kHz FWHM and 311 kHz 20‐dB linewidth. We demonstrate experimentally the dependence of laser's linewi
## Abstract The influences of photodarkening in highly doping ytterbium‐doped fibers (YDFs) on the performance of fiber lasers were investigated in this study. The experimental results show that the threshold and the output power of the laser, respectively, increases and decreases over the pumping