𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effect of cup abduction angle and head lateral microseparation on contact stresses in ceramic-on-ceramic total hip arthroplasty

✍ Scribed by Elhadi Sariali; Todd Stewart; Zhongmin Jin; John Fisher

Book ID
116616351
Publisher
Elsevier Science
Year
2012
Tongue
English
Weight
766 KB
Volume
45
Category
Article
ISSN
0021-9290

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of cup inclination angle during m
Effect of cup inclination angle during microseparation and rim loading on the wear of BIOLOX® delta ceramic-on-ceramic total hip replacement
✍ Mazen Al-Hajjar; Ian J. Leslie; Joanne Tipper; Sophie Williams; John Fisher; Lou 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 478 KB

## Abstract Ceramic‐on‐ceramic (CoC) bearings in total hip replacements (THRs) have shown low wear volumes under standard gait in hip simulator studies. However, clinical reports have indicated variations in wear rates and formation of stripe‐like wear area on the ceramic femoral heads. The aim of

Wear analysis of retrieved ceramic-on-ce
Wear analysis of retrieved ceramic-on-ceramic articulations in total hip arthroplasty: Femoral head makes contact with the rim of the socket outside of the bearing surface
✍ Tetsuya Yamamoto; Masanobu Saito; Masaru Ueno; Takehito Hananouchi; Yusuke Tokug 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 310 KB

## Abstract We investigated articular bearing surfaces retrieved from three patients with ceramic‐on‐ceramic total hip arthroplasties using high‐quality alumina. The duration of implantation was 3.5, 3.0, and 2.5 years, respectively. Dislocation of the hip joint after implantation did not occur in