✦ LIBER ✦

Effect of BaSO4 on the fatigue crack propagation rate of PMMA bone cement

✍ Scribed by Molino, L. N. ;Timmie Topoleski, L. D.

Publisher: John Wiley and Sons
Year: 1996
Tongue: English
Weight: 860 KB
Volume: 31
Category: Article
ISSN: 0021-9304
DOI: 10.1002/(sici)1097-4636(199605)31:1<131::aid-jbm14>3.0.co;2-q

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The contradictory effects of pores on fa

The contradictory effects of pores on fatigue cracking of bone cement

✍ Dennis Janssen; René Aquarius; Jan Stolk; Nico Verdonschot 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 280 KB 👁 1 views

## Abstract The beneficial effect of porosity reduction on the fatigue life of bone cement has been demonstrated in numerous experimental studies. Clinically, however, it seems that the beneficial effect of porosity reduction of cement around total hip replacement components can only be found in la

Effect of porosity and environment on th

Effect of porosity and environment on the mechanical behavior of acrylic bone cement modified with acrylonitrile-butadiene-styrene particles: Part II. Fatigue crack propagation

✍ Vila, M. M. ;Ginebra, M. P. ;Gil, F. J. ;Planell, J. A. 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 319 KB 👁 3 views

The aim of this study was to investigate the effect of adding an elastomeric second phase, acrylonitrile-butadiene-styrene, on the fatigue crack propagation behavior of poly(methyl methacrylate) bone cement. Moreover, the influence of porosity and environmental conditions was studied. When comparing

Effect of mixing method and storage temp

Effect of mixing method and storage temperature of cement constituents on the fatigue and porosity of acrylic bone cement

✍ Lewis, Gladius 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 171 KB 👁 3 views

The influence of the storage temperature of the cement constituents prior to mixing (21 vs. 4 degrees C) and the mixing method (hand mixing vs. vacuum mixing) on the uniaxial tension-compression fatigue performance and porosity of Palacos R acrylic bone cement was studied. The fatigue results were a

The effect of the addition of methylene

The effect of the addition of methylene blue on the fatigue strength of simplex P bone–cement

✍ Jeffrey P. Davies; Dr. William H. Harris 📂 Article 📅 1992 🏛 Wiley (John Wiley & Sons) 🌐 English ⚖ 443 KB 👁 1 views

## Abstract To aid in cement removal during revision arthroplasty, it has been proposed to add methylene blue to bone cement to provide contrast between the cement and bone. However, it is essential that the fatigue strength of the cement not be reduced by the addition of the methylene blue. The ef

The effects of degree of crosslinking on

The effects of degree of crosslinking on the fatigue crack initiation and propagation resistance of orthopedic-grade polyethylene

✍ Baker, D. A. ;Bellare, A. ;Pruitt, L. 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 412 KB

## Abstract Crosslinked ultrahigh molecular weight polyethylene (UHMWPE) has been recently approved by the Food and Drug Administration for use in orthopedic implants. The majority of commercially available UHMWPE orthopedic components are crosslinked using e‐beam or gamma radiation. The level of c

Effect of hold time and environment on F

Effect of hold time and environment on Fatigue Crack Growth Rate in Ti Alloys

✍ Dr. D. Munz; V. Bachmann 📂 Article 📅 1980 🏛 John Wiley and Sons 🌐 English ⚖ 491 KB

## Abstract In titanium alloys an effect of hold time at maximum load in a cyclic test is observed if K~max~ exceeds the threshold for crack propagation at a constant load test. For tests in air it is possible to predict crack growth rate for a hold time cycle from the crack growth rates from a cyc