The explicit, non-recursive symbolic form of the dynamic model of robotic manipulators with compliant links and joints are developed based on a Lagrangiau-assumed mode of formulation. This form of dynamic model is suitable for controller synthesis, as well as accurate simulations of robotic applicat
Dynamic modelling, simulation and control of a manipulator with flexible links and joints
โ Scribed by B. Subudhi; A.S. Morris
- Publisher
- Elsevier Science
- Year
- 2002
- Tongue
- English
- Weight
- 256 KB
- Volume
- 41
- Category
- Article
- ISSN
- 0921-8890
No coin nor oath required. For personal study only.
โฆ Synopsis
The paper presents a dynamic modelling technique for a manipulator with multiple flexible links and flexible joints, based on a combined Euler-Lagrange formulation and assumed modes method. The resulting generalised model is validated through computer simulations by considering a simplified case study of a two-link flexible manipulator with joint elasticity. Controlling such a manipulator is more complex than controlling one with rigid joints because only a single actuation signal can be applied at each joint and this has to control the flexure of both the joint itself and the link attached to it. To resolve the control complexities associated with such an under-actuated flexible link/flexible joint manipulator, a singularly perturbed model has been formulated and used to design a reduced-order controller. This is shown to stabilise the link and joint vibrations effectively while maintaining good tracking performance.
๐ SIMILAR VOLUMES
This paper presents a PD controller for robot manipulator considering simultaneously joint #exibility, actuators dynamics as well as friction. The convergence analysis of the proposed PD controller is carried out using passivity. Global convergence to a desired "xed angular position is proved using
This paper presents a comprehensive dynamic modeling of a flexible link manipulator by using Hamilton's principle. The model is formulated by considering the flexible arm as a Timoshenko beam model. Hence, the shear, bending as well as rotational inertia effect of the manipulator are all taken into
This paper presents simulation and experimental results on the performance of neural network-based controllers for tip position tracking of flexible-link manipulators. The controllers are designed by utilizing the modified output re-definition approach. The modified output re-definition approach req