𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Durability analysis of carburized components using a local approach based on elastic stresses

✍ Scribed by T. Bruder; M. Schön

Publisher
John Wiley and Sons
Year
2001
Tongue
English
Weight
256 KB
Volume
32
Category
Article
ISSN
0933-5137

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The Influence of Local Slip in Hertzian
The Influence of Local Slip in Hertzian Contacts on the Subsurface Elastic Material Stresses of Rolling Element Components
✍ Dr. A. P. Noronha 📂 Article 📅 1993 🏛 John Wiley and Sons 🌐 English ⚖ 692 KB

## Abstract Rolling element bearing components are subjected to high loads. These loads are transmitted from one bearing component to the next through Hertzian contacts. Since the bearing components are in motion as they transmit load, the elliptical contact region is subjected to normal as well as

Incompressible viscoplastic flow analysi
Incompressible viscoplastic flow analysis using a quadrilateral 2-D element based on mixed interpolation of tensorial components
✍ Dvorkin, Eduardo N. ;Canga, Marcelo E. 📂 Article 📅 1993 🏛 John Wiley and Sons 🌐 English ⚖ 348 KB

In the Eulerian description of metal forming operations usually rigid/incompressible viscoplastic material models are used. In this paper a quadrilateral 2-D finite-element formulation for incompressible viscoplastic flow analysis is developed. The element (QMITC) is based on mixed interpolation of

On the efficient computation of the stre
On the efficient computation of the stress components near a closed boundary in plane elasticity by using classical complex boundary integral equations
✍ Nikolaos I. Ioakimidis 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 142 KB 👁 2 views

Complex boundary integral equations (Fredholm-type regular or Cauchy-type singular or even Hadamard-Mangler-type hypersingular) have been used for the numerical solution of general plane isotropic elasticity problems. The related Muskhelishvili and, particularly, Lauricella-Sherman equations are fam