## Abstract A novel square split‐ring resonator (SRR) defected ground structure (DGS) cell model is presented and analyzed in detail. Then an improved SRR DGS cell model loaded with open stubs is proposed in order to enhance the out‐band suppression. Based on this structure, an S‐band microstrip lo
Dual bandstop resonator using combined split ring resonator and defected ground structure
✍ Scribed by Amr M. E. Safwat; Sergei Tretyakov; Antti Räisänen
- Book ID
- 102949041
- Publisher
- John Wiley and Sons
- Year
- 2007
- Tongue
- English
- Weight
- 525 KB
- Volume
- 49
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Defected ground structure and split ring resonator are combined to form a compact dual bandstop filter or a dual pole bandstop filter. An equivalent circuit model is developed for the proposed structure and it agrees very well with EM simulation. A dual bandstop resonator was fabricated. Measurements and theoretical predictions are in a very good agreement. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 49: 1249–1253, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.22464
📜 SIMILAR VOLUMES
## Abstract A novel type of dual‐band microstrip structure and its equivalent circuit are investigated, which is composed of defected split‐ring resonator and interdigital capacitor. The influence of design parameters on the frequency characteristics is discussed, then a dual‐band microstrip filter
## Abstract The left‐handed properties of a split‐ring resonator defected ground structure transmission line (TL) is investigated in this article. Then the transmission zero location, dispersion relation, impedance characteristic as well as refraction index are derived in detail. The numerical and
## Abstract Design of a novel compact bandstop filter composed on an open‐loop‐ring resonator and a defected ground structure (DGS) for coplanar waveguide is proposed and investigated. A simple coplanar open‐loop‐ring resonator has been designed and tested for the stop‐band from 3.9 to 4.3 GHz with
## Abstract This article presents a novel microstrip dual‐band bandpass filter (BPF) comprising a symmetrically‐bent, open‐loop, square‐ring stepped impedance resonator (SIR) on the upper surface and a symmetrical U‐shaped defected ground structure (DGS) on the lower metallic ground plane. A center