✦ LIBER ✦

Dual-band design of single-stub impedance matching networks with application to dual-band stubbed T-junctions

✍ Scribed by Myun-Joo Park; Byungje Lee

Publisher: John Wiley and Sons
Year: 2010
Tongue: English
Weight: 198 KB
Volume: 52
Category: Article
ISSN: 0895-2477
DOI: 10.1002/mop.25201

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

A new design method of single‐stub impedance matching networks is presented for the dual‐band application. The dual‐band operating conditions are analyzed in detail and the design equations are derived in concise form for different locations and termination types of the stub line. The proposed impedance matching scheme is successfully applied to the design of a stubbed dual‐band T‐junction power divider. © 2010 Wiley Periodicals, Inc. Microwave Opt Technol Lett 52: 1359–1362, 2010; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.25201

📜 SIMILAR VOLUMES

Design of dual-band antenna with U-shape

Design of dual-band antenna with U-shaped open stub for WLAN/UWB applications

✍ Jung N. Lee; Ji H. Kim; Jong K. Park; Jin S. Kim 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 981 KB

## Abstract In this article, we have proposed a dual‐band antenna with U‐shaped open stub for wideband local area network (WLAN)/ultra wideband (UWB) applications. The designed dual‐band antenna consists of two semicircle radiating patches, a rectangular slot separating the two semicircles, one ste

Novel Pi-type stepped-impedance-stub bra

Novel Pi-type stepped-impedance-stub branch line and its application to dual-band power divider with high suppression of intermediate frequencies

✍ Yongle Wu; Yuanan Liu; Shulan Li; Cuiping Yu 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 734 KB

## Abstract A novel Pi‐type branch line is constructed by using two shunt stepped‐impedance stubs in this paper. Introducing the stepped‐impedance stubs increases design degrees of freedom of this Pi‐type line. This structure can be used to replace arbitrary single‐section transmission line in micr