## Abstract A novel design of a dual‐mode resonator with double‐ring structure for a band‐pass filter is presented in this paper. Voltage/current couplings between the two rings are proposed based on a mode chart. Because each ring exhibits dual‐mode responses, they determine the range of operation
Double-sided open split ring resonator for compact microstrip band-pass filter design
✍ Scribed by de Dios Ruiz, J.; Hinojosa, J.
- Book ID
- 117812195
- Publisher
- The Institution of Engineering and Technology
- Year
- 2012
- Tongue
- English
- Weight
- 820 KB
- Volume
- 6
- Category
- Article
- ISSN
- 1751-8725
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract In this paper, the potential use of complementary split‐ring resonators (CSRRs) to design very compact waveguide filters, by etching a CSRR in the center of a metallic sheet, is demonstrated. This original layout reduces the dimensions of the well‐known resonant‐cavity waveguide filters
## Abstract A novel compact microstrip low‐pass filter (LPF) is proposed using open circuit stubs and square patches alongwith complementary split ring resonator (CSRR). It exhibits wide stopband and sharp rejection. A demonstration LPF, having 3‐dB cutoff frequency of 1.45 GHz, was fabricated and
A novel, planar inverted-F antenna with a slotted T-shaped ground plane is proposed. It is shown that introducing a cross-shaped slot onto the T-shaped ground can greatly broaden the bandwidth without affecting the operating frequency. The measured bandwidth of the proposed antenna is from 1950 to 2
## Abstract A deep and wide rejection bandwidth, sharp cutoff and compact low‐pass filter design using open complementary split ring resonator (OCSRR), and open stub is presented in this article.OCSRR is counterpart of the open split ring resonator. The proposed low‐pass filter consist of two OCSRR