The tensile creep and creep fracture properties in air at 1300 • C are documented for two ceramic fibre-reinforced ceramic-matrix composites (CFCMCs). These recently developed materials were produced with woven bundles of Hi-Nicalon TM fibres reinforcing either A1 2 O 3 or enhanced SiBC matrices, al
Dispersion processing of creep resistant whisker-reinforced ceramic-matrix composites
✍ Scribed by John R. Porter
- Publisher
- Elsevier Science
- Year
- 1989
- Tongue
- English
- Weight
- 766 KB
- Volume
- 107
- Category
- Article
- ISSN
- 0921-5093
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
The compressive strength of SiC whisker-reinforced hot-pressed silicon nitride was characterized over a wide range of strain rate. It was found that the strength of the matrix alone is extremely sensitive to strain rate under impact loading, and that this sensitivity is retained in the reinforced co
## Abstract The flexural creep and creep strain recovery behaviour during creep‐fatigue tests of a cross‐ply SiC fibre reinforced Barium Magnesium Aluminosilicate glass‐ceramic matrix composite was investigated at 1100°C in air. Only heat‐treated samples (1 h at 1100°C) were tested. Stress levels o
A brief summary of recent analytical solutions which accurately describe the experimentally observed toughening behavior in a variety of whisker reinforced ceramics is presented. These results are found to provide important insights into the whisker, matrix, and interface properties required to obta
Dense short silicon carbide (SiC sf ) and carbon fibers (C sf ) reinforced BaAl 2 Si 2 O 8 (BAS) glass-ceramic composites with silicon nitride were fabricated by hot-pressing technique. The phase characterization, microstructure, mechanical properties and fracture behavior of the composites were inv