𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Differential scanning calorimetry and dynamic mechanical analysis of amine-modified urea–formaldehyde adhesives

✍ Scribed by R. O. Ebewele

Publisher
John Wiley and Sons
Year
1995
Tongue
English
Weight
857 KB
Volume
58
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Glass transition temperatures of hydroca
Glass transition temperatures of hydrocarbon blends: Adhesives measured by differential scanning calorimetry and dynamic mechanical analysis
✍ Adam S. Cantor 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 153 KB 👁 2 views

A comparison of calculated and measured glass transition temperatures of a series of three-component hydrocarbon blends was performed. The blends were prepared as mixtures of an elastomer with different proportions of tackifying resin and oil. Glass transition temperature, T g , was measured by diff

Curing of low level melamine-modified ur
Curing of low level melamine-modified urea-formaldehyde particleboard binder resins studied with dynamic mechanical analysis (DMA)
✍ B. Young No; Moon G. Kim 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 170 KB 👁 2 views

## Abstract Effects of resin formulation, catalyst, and curing temperature were studied for particleboard binder‐type urea‐formaldehyde (UF) and 6 ∼ 12% melamine‐modified urea‐melamine‐formaldehyde (UMF) resins using the dynamic mechanical analysis method at 125 ∼ 160°C. In general, the UF and UMF