✦ LIBER ✦

Differences between the wear couples metal-on-polyethylene and ceramic-on-ceramic in the stability against dislocation of total hip replacement

✍ Scribed by Rainer Bader; Erwin Steinhauser; Susanne Zimmermann; Wolfram Mittelmeier; Roger Scholz; Raymonde Busch

Book ID: 111591258
Publisher: Springer
Year: 2004
Tongue: English
Weight: 340 KB
Volume: 15
Category: Article
ISSN: 0957-4530
DOI: 10.1023/b:jmsm.0000030214.79180.13

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of cup inclination angle during m

Effect of cup inclination angle during microseparation and rim loading on the wear of BIOLOX® delta ceramic-on-ceramic total hip replacement

✍ Mazen Al-Hajjar; Ian J. Leslie; Joanne Tipper; Sophie Williams; John Fisher; Lou 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 478 KB

## Abstract Ceramic‐on‐ceramic (CoC) bearings in total hip replacements (THRs) have shown low wear volumes under standard gait in hip simulator studies. However, clinical reports have indicated variations in wear rates and formation of stripe‐like wear area on the ceramic femoral heads. The aim of

Tribology in Total Hip Arthroplasty || C

Tribology in Total Hip Arthroplasty || Ceramic Surface Engineering of the Articulating Surfaces Effectively Minimizes Wear and Corrosion of Metal-on-Metal Hip Prostheses

✍ Knahr, Karl 📂 Article 📅 2011 🏛 Springer Berlin Heidelberg ⚖ 172 KB

A randomised prospective evaluation of c

A randomised prospective evaluation of ceramic-on-ceramic and ceramic-on-highly cross-linked polyethylene bearings in the same patients with primary cementless total hip arthroplasty

✍ Young-Hoo Kim, Jang-Won Park, Sourabh S. Kulkarni… 📂 Article 📅 2013 🏛 Springer 🌐 English ⚖ 199 KB

Wear analysis of retrieved ceramic-on-ce

Wear analysis of retrieved ceramic-on-ceramic articulations in total hip arthroplasty: Femoral head makes contact with the rim of the socket outside of the bearing surface

✍ Tetsuya Yamamoto; Masanobu Saito; Masaru Ueno; Takehito Hananouchi; Yusuke Tokug 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 310 KB

## Abstract We investigated articular bearing surfaces retrieved from three patients with ceramic‐on‐ceramic total hip arthroplasties using high‐quality alumina. The duration of implantation was 3.5, 3.0, and 2.5 years, respectively. Dislocation of the hip joint after implantation did not occur in

Effects of normal loads on the friction

Effects of normal loads on the friction and wear properties of metals and ceramic against cermet in vacuum

✍ T Hisakado; N Hashizume 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 794 KB

The influence of femoral head surface ro

The influence of femoral head surface roughness on the wear of ultrahigh molecular weight polyethylene sockets in cementless total hip replacement

✍ Elfick, Alistair P. D. ;Hall, Richard M. ;Pinder, Ian M. ;Unsworth, Anthony 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 338 KB 👁 2 views

A theoretical relationship was recently proposed relating the wear behavior of polymetric bearing materials articulating against hard counterfaces. 1 This model attempts to predict the influence of surface roughness on wear. Laboratory-based studies have been used to establish the validity of these