Properties of Dielectric BaTiO 3 Thin Films Prepared by Spray Pyrolysis. -Both smooth and highly porous films are deposited depending on deposition temp. and rate. As-deposited films contain an unidentified, low-symmetry Ba titanate modification. Annealing at 500-900 β’ C converts the films to the cu
Dielectric and optical properties of BaTiO3thin films prepared by low-temperature process
β Scribed by Jinbao Xu; Jiwei Zhai; Xi Yao; Jianqiang Xue; Zhiming Huang
- Book ID
- 106442800
- Publisher
- Springer
- Year
- 2007
- Tongue
- English
- Weight
- 330 KB
- Volume
- 42
- Category
- Article
- ISSN
- 0928-0707
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
Eu-doped BaTiO 3 thin films with a pseudo-cubic perovskite structure were successfully fabricated on magnesia substrates at low temperature by using a high-concentration sol-gel process, in which the newly developed gel-aging process on substrate was employed. Film microstructure, crystallinity, sin
The present study focused on ZnO thin films fabricated by sol-gel process and spin coated onto Si (1 0 0) and quartz substrates. ZnO thin films have a hexagonal wu Β¨rtzite structure with a grain diameter about 50 nm. Optical properties were determined by photoluminescence (PL) and absorption spectro
Thin film capacitors with BaTiO 3 as dielectric and RuO 2 as electrode material have been prepared by rf-magnetron sputtering at temperatures up to 750 1C and under various oxygen partial pressures. They have been analyzed by complex impedance spectroscopy in the temperature range 20-200 1C. At abou