Device for isolating a sealed valve from a pumping line
- Publisher
- Elsevier Science
- Year
- 1970
- Tongue
- English
- Weight
- 147 KB
- Volume
- 20
- Category
- Article
- ISSN
- 0042-207X
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
include a deformable portion interconnected to a vapour barrier portion by way of a mechanical or adhesive interlocking connection. This deformable portion can be made from an elastomeric material. The vapour barrier portion can be formed from a wide variety of materials that inhibit permeation of t
## Seal ring Applicans: NOK Corporation, Japan This patent describes a design of butt joint for pistons rings which from the description are used as shaft seals. The rings have a stepped butt joint and one half of the joint has a surface that slopes in the circumferential direction and is engaged
System for
A high flow rate low pressure safety valve with a teble-tennis ball seating on a neoprene O-ring has been successfully fabricated and used on the intake and exhaust lines of a 4He transfer pump. This gas-tight valve opens at differential pressures less than 0.5 kN m -2 and allows 4 He gas flow rates