Thin film composite membranes of sulfonated poly(phenylene oxide) (SPPOk-polysulfone (PS) (SPPO-PS) were prepared by coating the hydrogen or sodium form of SPPO onto various porous substrates such as polysulfone (PS). The effects of membrane preparation conditions and feed water variables on the sal
Development of thin-film composite membranes for carbon dioxide and methane separation using sulfonated poly(phenylene oxide)
โ Scribed by Ji-Won Rhim; Geeta Chowdhury; Takeshi Matsuura
- Publisher
- John Wiley and Sons
- Year
- 2000
- Tongue
- English
- Weight
- 113 KB
- Volume
- 76
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
โฆ Synopsis
Novel membranes based on sulfonated poly (phenylene oxide) (SPPO) was developed. SPPO membranes in the hydrogen form were converted to metal ion forms. The effect of exchange with metal ions including monovalent (Li ฯฉ , Na ฯฉ , K ฯฉ ), divalent (Mg 2ฯฉ , Ba 2ฯฉ , Ca 2ฯฉ ) and trivalent (Al 3ฯฉ ) ions was investigated in terms of permeation rate and permeation rate ratios for CO 2 and CH 4 gases. Both dense homogeneous membranes and thin-film composite (TFC) membranes were studied for their gas separation characteristics. The effect of membrane preparation conditions and operating parameters on the membrane performance were also investigated. The selectivity of the TFC membrane increased as the cationic charge density increased as a result of electrostatic cross-linking. TFC membrane of very high selectivity was achieved by coating a thin layer of SPPO-Mg on a PES substrate.
๐ SIMILAR VOLUMES
The effect of sulfonation and bromination-sulfonation on the gas transport properties of polyphenylene oxide has been investigated. These high-performance modified polymers have been studied in the form of TFC membranes by solution coating on the skin side of polyetherimide hollow fibers. TFC membra