✦ LIBER ✦

Development of micropin fabrication process using tool based micromachining

✍ Scribed by M. Azizur Rahman; M. Rahman; A. Senthil Kumar; H.S. Lim; A.B.M.A. Asad

Publisher: Springer
Year: 2005
Tongue: English
Weight: 376 KB
Volume: 27
Category: Article
ISSN: 0268-3768
DOI: 10.1007/s00170-004-2270-9

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Development of a micromachining process

Development of a micromachining process for the fabrication of a superconductor magnetic-field sensor

✍ A. Natarajan; W. Wang; E. Ma; R. N. Bhattacharya; R. D. Blaugher 📂 Article 📅 1999 🏛 Springer-Verlag 🌐 English ⚖ 374 KB

Developing E.S. for process control usin

Developing E.S. for process control using Unix based tools

✍ J.F Blanes; J Simó; M Martínez; J.S Senent 📂 Article 📅 1994 🏛 Elsevier Science ⚖ 579 KB

Fabrication of a silicon micromachined c

Fabrication of a silicon micromachined capacitive microphone using a dry-etch process

✍ Y.B Ning; A.W Mitchell; R.N Tait 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 581 KB

Evaluation of the fabrication of pressur

Evaluation of the fabrication of pressure sensors using bulk micromachining before IC processing

✍ M.A. de Samber; T.P.L. Ho-Tran 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 539 KB

Development of a computer-based intervie

Development of a computer-based interviewing tool to enhance the requirements gathering process

✍ Katrina Hands; D. Ramanee Peiris; Peter Gregor 📂 Article 📅 2004 🏛 Springer-Verlag 🌐 English ⚖ 417 KB

Effect of tool rotating rate on foaming

Effect of tool rotating rate on foaming properties of porous aluminum fabricated by using friction stir processing

✍ Yoshihiko Hangai; Takao Utsunomiya; Makoto Hasegawa 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 783 KB

A1050 porous aluminum is fabricated by the FSP route and the effect of the tool rotating rate on the porosity and morphology of the pores is investigated. To fabricate high-porosity porous aluminum with a uniform pore size distribution, a certain amount of stirring action is necessary; however, exce