Development of a 1-m plasma source for heavy ion beam charge neutralization

✍ Scribed by Philip C. Efthimion; Erik P. Gilson; Larry Grisham; Ronald C. Davidson; Simon Yu; William Waldron; B. Grant Logan

• Publisher: Elsevier Science
• Year: 2005
• Tongue: English
• Weight: 317 KB
• Volume: 544
• Category: Article
• ISSN: 0168-9002
• DOI: 10.1016/j.nima.2005.01.264

✦ Synopsis

Highly ionized plasmas are being employed as a medium for charge neutralizing heavy ion beams in order to focus to a small spot size. Calculations suggest that plasma at a density of 1-100 times the ion beam density and at a length $0.1-1 m would be suitable for achieving a high level of charge neutralization. A radio frequency (RF) source was constructed at the Princeton Plasma Physics Laboratory (PPPL) in support of the joint Neutralized Transport Experiment (NTX) at the Lawrence Berkeley National Laboratory (LBNL) to study ion beam neutralization. Pulsing the source enabled operation at pressures $10 À6 Torr with plasma densities of 10 11 cm À3 . Near 100% ionization was achieved. The plasma was 10 cm in length, but future experiments require a source 1 m long. The RF source does not easily scale to the length. Consequently, large-volume plasma sources based upon ferroelectric ceramics are being considered. These sources have the advantage of being able to increase the length of the plasma and operate at low neutral pressures. The source will utilize the ferroelectric ceramic BaTiO 3 to form metal plasma. A 1 m long section of the drift tube inner surface of NTX will be covered with ceramic. A high voltage ($1-5 kV) is applied between the drift tube and the front surface of the ceramic by placing a wire grid on the front surface. Plasma densities of 10 12 cm À3 and neutral pressures $10 À6 Torr are expected. A test stand to produce 20 cm long plasma is being constructed and will be tested before a 1 m long source is developed.